-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Sold Echo cs-400 project
- Thread starter Steven Trexler
- Start date
Help Support Arborist Forum:
stubnail67
Addicted to ArboristSite
great deal there... i have 2 perfect shape so i will let some one else get this.... don't wait to long ya all
smokey7
jack of a lot ace of a few
I may be interested in this
Steven Trexler
ArboristSite Guru
It's still for sale.
Stihlbillie
Hillbilly Deluxe
Straight-gassed?
-chimpboy
-chimpboy
smokey7
jack of a lot ace of a few
What would it cost roughly to send to 48071? I'm not real sure what these sell for so I'm trying to keep cost reasonable. Has this saw been pulled down at all? And what year is it?
Steven Trexler
ArboristSite Guru
No idea if it was straight gassed and I have not dug into at all. It came in a large group of 16 saws I bought from a tree service. So I would assume air leak. I'm estimating shipping at around $20 and i'll cover half.
nwmo_aggie
ArboristSite Operative
PM sent
Steven Trexler
ArboristSite Guru
$50 plus half shipping?
Pm sent
Full Chisel
Slingin' Stihls and runnin' Huskies
The H jet was probably never richened up from the factory settings and ran hard.
just rebuilt one of these, video needs to be edited...but Full Chisel seems to be right. the saw was starving for fuel, and the carb looked clean.... maybe the saw I had was straight gassed, but I'm not so sure. May have just starved for fuel and was run hard (with a dull chain). The carb needs to have the limiters removed. they need to be aligned, then pulled up with a small set of dykes. They will just pop off, and you'll be left with a nicely adjustable carb.
all better
all better
