Echo cs2511t bar question

[sprung22]

I have the stock 12” bar and 3/8 .050 chain that came on this saw. Does anyone have a link to a 12” bar in .043 for sale? I checked Baileys but all I could find is bars for the 271t. Does it have the same bar mount as the 2511? If that’s the case I’m in business. Also anyone recommend or know of a chain in .043 that only has the one raker and not that garbage two raker safety setup like stills .043.
Thanks

 

[Deleted member 149229]

http://en.oregonproducts.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG

 

[Colt Marlington]

Here's the Echo bar.
https://www.echo-usa.com/Products/A...ssories/Bars/12-Narrow-Kerf-Bar-–-12A4CD3745C

Don't see any yellow chains. May have to get one made at a saw shop?

Stihl 61 PM possibly. Or PMM maybe?

 

[sprung22]

Thanks

 

[Franny K]

Oregon 90S is .043 chain with no bumper features, small cutters, might be just a few years obsolete. If you will settle for .043 with the same size cutter as the 0.050 stuff Carlton N4C, and others even chisel cutters on eBay.

Stihl 61pmm3 is the best,on a Stihl shaped bar can plunge in any way I tried. The bumpers only complicate matters as the cutters are sharpened back. Their 44dl loops may be within adjuster limits otherwise probably not stocked. Some places buy 2 get 1. $35 or so for 3.