Log Man
ArboristSite Member
Would this be a good grease for the sprocket drum bearing and oil pump drive on my Stihl chainsaw?
MK-WS2-HT High Temperature EP Grease with WS2.
Temp Range -20 degrees C (-4 degrees F) to 800 degrees C (1472 degrees F)
Dropping Point higher than 320 degrees C (608 degrees F)
Load Bearing 300,000 PSI
It has lowest coefficient of friction, exellent Extreme Pressure (EP) properties, high resistance to water, rust, and humid environment. EP properties and strong resistance to abrasion means grease is ideal for high load and impact load applications. This grease is made in Canada.
I found it available at Lower Friction.com for $20.00/14oz. Tube.
MK-WS2-HT High Temperature EP Grease with WS2.
Temp Range -20 degrees C (-4 degrees F) to 800 degrees C (1472 degrees F)
Dropping Point higher than 320 degrees C (608 degrees F)
Load Bearing 300,000 PSI
It has lowest coefficient of friction, exellent Extreme Pressure (EP) properties, high resistance to water, rust, and humid environment. EP properties and strong resistance to abrasion means grease is ideal for high load and impact load applications. This grease is made in Canada.
I found it available at Lower Friction.com for $20.00/14oz. Tube.