Homelite Chainsaws

[2broke2ride]

I WILL GIVE YOU THE 200. DOES IT COME WITH A BAR?

I sent you a PM, I have a 24inch bar and chain that can go with it.

Sent from my SM-G950U using Tapatalk

 

[2broke2ride]

Somebody make me an offer on this saw!
Super XL925. I've had it listed both locally and here for months and no bites, I'm probably too high on my price but I'm not sure what it's worth. I will throw in a 24inch bar and good chain for the right price.
New fuel line,filter, carb kit, runs and cuts great.
I will also entertain trades for Macs or Mac parts.

Sent from my SM-G950U using Tapatalk

Bump, no buyer yet.

Sent from my SM-G950U using Tapatalk

 

[MS460WOODCHUCK]

You might want to try Bob Johnson,if he doesn't have something to fit,then you're SOL.607-638-9297.He does phone or fax sales only,no web site,he's old school.He does take major credit cards.

I called this # and get a fax #. Is there by chance another # to call him? Thanks!

 

[edju1958]

He's only open from 9:30 a.m. till noon then he closes for lunch and reopens at 1:30 till 5

Sent from my LGMP260 using Tapatalk

 

[MS460WOODCHUCK]

Are the 1050, 2100 and 1100 or any other models all built on the same basic chassis? Are any parts interchangeable? Are the clutch and drums the same?

 

[Maintenance supervisor]

Are the 1050, 2100 and 1100 or any other models all built on the same basic chassis? Are any parts interchangeable? Are the clutch and drums the same?

Possibly the c-5 ,c-9 TYPE SAWS.

 

[MS460WOODCHUCK]

Possibly the c-5 ,c-9 TYPE SAWS.

So the 2100 clutch the same or no?

 

[Maintenance supervisor]

So the 2100 clutch the same or no?

I want to say yes but I don't have access to one. The clutch rides on a bearing or sleeve so I imagine the crank diameter wouldn't be different.

 

[MS460WOODCHUCK]

What bar mount does the 1050 run? Is it the same as the 650-750?

 

[2broke2ride]

Ok guys, the 925 sold, here's the Next one up for grabs.
C71, not the prettiest saw but it runs and cuts great. Rebuilt carb, new fuel line and filter. Set up for 3/8 chain. Looking for $150 plus the ride but feel free to shoot me offers, I dont get easily insulted lol.

Sent from my SM-G950U using Tapatalk

 

[Freudianfloyd]

I picked up these three beauties yesterday. Not sure exact price I paid as there were some other items in the deal, but around $100. Not the deal of the century, but not my worst deal. I was told they run, that is yet to be seen however.

 

[MacAttack]

Yesterday I helped my FIL haul a Zero Turn mower to my wife's grandfather's house, who is unfortunately not likely to be alive much longer. He has a big old barn full of junk that we will basically sort through and decide what to keep. I found some old saws including these little Homelites which sadly are in rough shape, all missing parts, do any of these look worth repairing or do I basically just have some parts saws? I don't think any of them are particularly notable?

Boy I was hoping it was my day to find a big old 80cc+ magnesium saw, haha.

 

[svk]

Yesterday I helped my FIL haul a Zero Turn mower to my wife's grandfather's house, who is unfortunately not likely to be alive much longer. He has a big old barn full of junk that we will basically sort through and decide what to keep. I found some old saws including these little Homelites which sadly are in rough shape, all missing parts, do any of these look worth repairing or do I basically just have some parts saws? I don't think any of them are particularly notable?

Boy I was hoping it was my day to find a big old 80cc+ magnesium saw, haha.

The EZ is the only thing worth working on IMO but others may disagree with me. Check to see if it’s a blue module saw before going any further.

Top handle XL’s are a dime a dozen and usually just need fuel lines and duckbills.

The 150 probably needs fuel system work.

I think the Mac is a 2.0 CI. I have one just like it that was given to me.

 

[MacAttack]

The EZ is the only thing worth working on IMO but others may disagree with me. Check to see if it’s a blue module saw before going any further.

Top handle XL’s are a dime a dozen and usually just need fuel lines and duckbills.

The 150 probably needs fuel system work.

I think the Mac is a 2.0 CI. I have one just like it that was given to me.

The McCulloch will be an easy fix, it's complete and looks like it has verrrry little use. One of the plastic recoil pawls on the flywheel is broken, which explains why it was sitting, I'll either find some or swap the flywheel from the 3818 i was going to fix.

 

[svk]

What size drill bit is optimum if a guy wishes to retrofit a Homelite duckbill to a different brand of saw?

 

[PogoInTheWoods]

You mean for like, oh, I dunno..., a MiniMac fuel tank? LOL

3.5mm should do the trick for a snug fit just below the flange.

 

[svk]

You mean for like, oh, I dunno..., a MiniMac fuel tank? LOL

Clairvoyant, you are.

 

[MacAttack]

This is a mod I'd like to see done and if it works.

 

[2broke2ride]

Ok guys, the 925 sold, here's the Next one up for grabs.
C71, not the prettiest saw but it runs and cuts great. Rebuilt carb, new fuel line and filter. Set up for 3/8 chain. Looking for $150 plus the ride but feel free to shoot me offers, I dont get easily insulted lol.

Sent from my SM-G950U using Tapatalk

Bump, someone buy this saw lol.

Sent from my SM-G950U using Tapatalk

 

[svk]

This is a mod I'd like to see done and if it works.

I think I’ll try it. I can’t have that pinhole top leaking on me when I’m trying to carry it through the woods.