Homelite Super xl-922

[casey v]

Looking for an IPL for the above saw. Can anyone point me in the right direction?

Thanks Mike

 

[ray benson]

Check the saws U.T.# then look here.
http://odref.com/homelite/chainsaw/index.html

 

[lesorubcheek]

Mike,
I'm not 100% positive, but I think the XL-922 was not built for the US market. Most 922s on eBay come from Canada. I have an IPL that combines the 921, 923 and 924, but does not include the 922. You can find this IPL at the orderef site above. I'm not sure of any differences between the 922 and the other models. Most parts will interchange.

Dan

 

[casey v]

Thanks Dan and Ray.

Mike

 

[bugfart]

Big difference.
The 900 series that end in 1 or 2 have a 2" bore, three and above have 2-1/8". All however have a 1.5" stroke and piston/cylinder swaps work just fine to include the piston pin and clips.
sxl923 has the points, sxl924 doesnt, and the sxl925 has the thin rings.

 

[casey v]

Looking at the saw, I can only find two numbers. The serial number and what looks like a pte # which is 50047. Nothing like the ut# at the above site which all start with a 1. Where on the saw can I find the ut#?

Thanks Mike

 

[ray benson]

Homelite says the saws have a U T # along with a serial number on a metal tag. But i have a 3100g that has no U T #.
Here is the IPL for the XL 921,923,924
http://odref.com/homelite/chainsaw/ut-24410a.PDF