How does this MS260 plug look to you as far

[MikeInParadise]

as carb setting.

It is from an MS260 with well over 50 tanks of fuel at 50 to 1, Maybe 100 tanks. I have never touched the settings and am very happy with the way that the saw runs.

Seems like it might be a bit on the white looking side to me.

Comments?

If you think it needs adjusting, which way?

These are about the best pictures that I can get of it. My camera just doesn't like closeup shots!

 

[West Texas]

If its not broke, don't fix it.

 

[ShoerFast]

Mike

The pictures could be more clear, but there good enoff to say that saw is running just slightly cool,,,,,, IOW, perfict!

If it were slightly hotter, it wouldent look glazed, but have more of a powder-coat look,,(you can see the tang is running hotter then the porcelin, like it should),,,,, it's runing like it feels!

Kevin

 

[Lakeside53]

Looks fine, but you really can't tell by just looking at the plug. Dependson what you were doing 30 seconds before you shut it down. Just tune it by ear, check with a tach, and if it cuts good, leave it. My plugs are all over the place, and they all work just fine.