Hello folks. I have a few saws that belong to a customer that he would like to sell. I will try to describe everything to the best of my knowledge. This one is a Husqvarna 2100cd in running condition. She runs pretty well and is in overall good shape but has been well used. Most of the plastic parts are in good shape besides the air filter cover which has a crack. The starter housing also has a couple dings. The pull cord also really needs to be replaced. The o-rings on the fuel & oil caps are shot. AV mounts are shot and the oiler button is a little stiff. The handlebar is full wrap and is mostly ok but is a little bent on the flywheel side. I do believe that it could be straighted back out. The on/off switch doesn't work, there is a break in the wire somewhere deeper inside. The air filter isn't bad but isn't good either. The rim sprocket looks new and is .404 pitch. A 36" Oregon bar and Stihl chain are included with the saw. The bar is .063 gauge .404 pitch and seems ok, although the tip might need to be swapped for a new one soon. The chain doesn't have much life left in it though. She is pretty clean on the outside and looks good for an old saw. Like I said she starts and runs pretty well but has also been well used. The owner is looking to get $350 out of it but is also open to offers. Thanks for looking!
