• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Husqvarna 50 series with husky 55 oem cylinder kit.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Thumb

ArboristSite Operative
Joined
Jan 24, 2022
Messages
160
Reaction score
39
Location
Hendersonville
Black top oem 45mm cylinder and oem 45mm piston. New lines, gaskets, filter20220721_170728.jpg20220721_170635.jpg20220721_170706.jpg20220721_170736.jpg20220721_170759.jpgs, fuel filter ready to work. In excellent shape. Saw Only I have a lightweight 20in Oregon and a 3/8 full chisel stihl chain. Paypal f&f $275 shipped with bar $275 shipped if buying for goods and services add 3% to $275. If saw only $235.
 
Is it a brand new OEM p&c or used one? I like this series of saw. I have one I bought new, still has original 44mm cylinder. I have another I put an OEM 46mm cylinder on. So did the 45mm come on the 51 and some of the 55s?
 
I have 1 50 with the black top with the 45mm used cylinder but still has 45 stamped on top it has no transfer, lines, gouges, damage of any kind. I bought a oem 45mm piston, ring, bearing, and pin. Rebuilt the walbro carb and put new lines and filters on it. Everything works as it should. Excellent compression and runs like a beast.
I also have another 50 series that I had to use a 51 top and a 51 starter assembly I still have the black top and 50 series starter assembly, I just couldn't locate the 50 air filter to choke it. I currently have the Zama with the choke lever but I do have the walbro 50 series carb and bulkhead just no air filter to choke it with the trigger on the 50 top cover. On this 50 I have a 46mm oem piston in just the same if not better cylinder still stamped clean and no transfer, lines, gouges, or any damages. Bought a oem piston, ring, needle bearing, and pin. New lines filters and carburetor kits on both. Has a 20" bar and chain on this one I have a Oregon lightweight for the other both ⅜ pitch. Both run excellent and are ready for work. 828-205-1166
 
Back
Top