Want to Buy Husqvarna or Stihl project saw

[Chev727]

Looking for another project saw, would prefer something over 60 cc but open to anything, non running preferred, and shipping to canada

 

[ChoppyChoppy]

Looking for another project saw, would prefer something over 60 cc but open to anything, non running preferred, and shipping to canada

I have a nice 041... I put a carb kit and new fuel lines, but still can't get it to pull fuel on its own.

 

[Chev727]

I have a nice 041... I put a carb kit and new fuel lines, but still can't get it to pull fuel on its own.

Those are nice old saws, I guess I should have specified a little better though I'd like something made in the late 80's or newer and pro model

 

[ChoppyChoppy]

Don't know your location, but if your not far from us, swing by the shop. I promise you'll find a project or 20!

 

[surfincr]

i've got a stihl 028 super wood boss that i believe just needs a carb kit, i say believe since i havent had a chance to go completely through it compression is 150psi and has spark. i also have the carb kit that would go with it. i'm looking to get $ 150 shipped power head only. i was planning on fixing it to sell but not going to have the time for a long while.

 

[Chev727]

Don't know your location, but if your not far from us, swing by the shop. I promise you'll find a project or 20!

I wish I could swing by but I'm about 5000 kms away, always wanted to relocate to around there though

i've got a stihl 028 super wood boss that i believe just needs a carb kit, i say believe since i havent had a chance to go completely through it compression is 150psi and has spark. i also have the carb kit that would go with it. i'm looking to get $ 150 shipped power head only. i was planning on fixing it to sell but not going to have the time for a long while.

I'll have to keep that one in mind, that's actually about my max price I can do right now but in Canadian dollars

 

[Chev727]

Would really like a husky from a 268 up to a 288 but I have a feeling that might be hard with my budget

 

[William Balaska]

How about a husky 575 that needs bearings but otherwise runs fine? $275 plus the ride.

 

[Chev727]

Looks like a nice saw, heard they have bearing problems though, and it's almost twice the price of my budget which is $150 including shipping

 

[William Balaska]

Good luck.

 

[BWS-LLC]

$150 shipped to Canada....

You will be lucky to get a 350 husky, Stihl 250 or if you are really lucky a 455/460 Rancher or MS290

It's going to cost dang nearb$50 just to ship

 

[Chev727]

$150 shipped to Canada....

You will be lucky to get a 350 husky, Stihl 250 or if you are really lucky a 455/460 Rancher or MS290

It's going to cost dang nearb$50 just to ship

Yeah I figured it was a long shot but thought I'd see, it's hard to find someone around here willing to get rid of a saw, I don't need a complete saw, it can be missing piston and cylinder etc

 

[Toad22t]

026 project?

 

[Chev727]

026 project?

Might be interested in a 026 project, how much?