Sold Jonsered 2165 PHO

[chipper1]

Great running saw that doesn't fit in the current stable as I just picked up a 2166. I ran this saw a couple weeks ago with a 24" B&C and it performed perfectly in a load of maple with a few sticks of cherry thrown in.
The saw is in great low hour condition.
It has a some paint chipping on the handlebar, and tje sticker came off the clutch cover, but it's a good looker.

I will add some more pictures in a bit.
If you would like specific pictures please let me know.
Thanks Brett.

$400 + shipping PHO.

 

[skippysphins]

Clean saw Brett should sell ...

 

[chipper1]

Clean saw Brett should sell ...

Thanks.

 

[chipper1]

Here's a few more pictures.
This is what the saw looks like, it has not been cleaned or polished up for these pictures just pulled out of the back of the suburban.
The sticker did come off the clutch side, but I still have it, and will send it with the saw if you need it .

 

[skippysphins]

Jealous ... It's nicer than mine ... But I know mine has cut at least 500 trees ...

 

[skippysphins]

So my saw has experience .lol

 

[Big_Wood]

So my saw has experience .lol

your saw has a shift on it lol at 500 tree's a saw is just broken in. unless of course it takes you a day to fall one tree. then your saw is clapped out

 

[Big Block]

Nice saw!

 

[Armbru84]

Nice saw and a great seller!

 

[skippysphins]

your saw has a shift on it lol at 500 tree's a saw is just broken in. unless of course it takes you a day to fall one tree. then your saw is clapped out

no not one a day lol

 

[chipper1]

Nice saw and a great seller!

Thanks Cole.
And BB.

 

[chipper1]

Jealous ... It's nicer than mine ... But I know mine has cut at least 500 trees ...

Don't be I know you have others that are much cleaner .
I do take trade ins sometimes LOL.

 

[Marshy]

Whats the difference between the 2165 and 2166?

 

[chipper1]

Whats the difference between the 2165 and 2166?

The 2166 is a 71cc saw but performs like a 2165 which is 65cc.
You can remove the cylinder on the the 2166 and then remove the transfer covers and grind out the restriction that makes it perform more like a 65cc saw. By doing this you have made it essentially a 2172.
I probably will not do that because I have other larger saws I can use, but it's nice to know I can if I sell my ported 044. I have some ported saws, but I like my stock ones also, as they all have their places.
You can also put a 2172 P&C on the 2165(365 husky) and it will be essentially a 2172(372 husky).
If I made any mistakes on the above feel free to fix them as I have never done the above, just repeating what I have read.
There are other differences, but this is the largest.
Hope this helps.

 

[PULLINmyPOULAN]

This saw is sold met up with Brett today great guy to deal with.First thing I do when buying as saw is look at the piston and it couldn't have looked better.Thanks Brett

 

[chipper1]

This saw is sold met up with Brett today great guy to deal with.First thing I do when buying as saw is look at the piston and it couldn't have looked better. Thanks Brett

Thanks Gunner, your welcome. I've been waiting to pull the muffler on one and find a hundred dollar bill in there .
Thanks for making the transaction smooth, and great talking to you again neighbor .