huskyslinger
xp390
I know these are basically a needle in a hay stack and or no longer. But i got to try. Let me know if anyone has some. Thank you
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Want to Buy Jonsered 630 Thin rings
- Thread starter huskyslinger
- Start date
Help Support Arborist Forum:
There was some on eBay awhile back ..also search Husqvarna 162 part number 501536801
Ernie
Ernie
I have the 50mm but no 48s
Bought some of these over a year ago, guy still has a bunch of them. 630/162 thin ring.
huskyslinger
xp390
Which guy?
huskyslinger
xp390
All great help. Did find one on ebay, but just one 
Here is the eBay link ..
https://www.ebay.com/itm/3625734379...zCCk5zuRd6&var=&widget_ver=artemis&media=COPY
https://www.ebay.com/itm/3625734379...zCCk5zuRd6&var=&widget_ver=artemis&media=COPY
eBay seller. Click the highlighted text in my first comment.
A used thin ring? I‘d pass. Unless he can show very little wear on those. Says he has 10 of them.
I did miss the USED part !
My apologies...I recently rebuilt a 630 and had a hard time finding these rings .
Ernie
They’re definitely new, not sure why he listed them as used. I bought a set a year or so back for my 630.
If they mic out all the way around at close to new specs they should be fine. But, isn't one of the reasons for discontinuing them their fast wear factor? At least, that's what I have read while trying to find replacements for a nice 2100 p&c I have. I would think used rings would be worn.
Ah, so, an inquiry to the seller is in order.
I paid 3 times the price of these when I finally found mine so if these are in fact new that's a great deal !
Ernie
Ernie
Wouldn’t be a bad idea.Ah, so, an inquiry to the seller is in order.
huskyslinger
xp390
Hes a salvage yard on the west side of wa state. Hes got a ton of stuff on ebay
I've had bad experiences with this seller. If everything goes well, they're great. But if anything goes wrong, it's never their fault. Read their negative feedback - there is plenty to read and they share a common thread.
Found them here also on Parts Tree https://www.partstree.com/parts/husqvarna-501536801/
I've ordered parts from them before and always had good luck .
Ernie
I've ordered parts from them before and always had good luck .
Ernie
They are good. The shipping shown implies that they are not in stock though. You might try calling them to see when (or if) they expect them.
