For those wondering what they said.Om een andere reden is de verbinding tussen gashendel en carburator of verbroken
ik vind met de beste wil van de wereld niet terug hoe dit in het verleden is bevestigd
iemand een idee
Typical Sachs Dolmar throttle linkage, the trigger just pushes the linkage forward. Not certain if anything in the pic is broken or missing. looks to be a 6000i or 6800i .Englisch Bitte
For those wondering what they said.
For another reason, the connection between the throttle body and the carburetor is broken
I can't find with the best will in the world how this has been fixed in the past
anyone have an idea
I cannot tell if the trigger is broken from the pic, the wire throttle linkage just sets in a cutout in the trigger.Better answer Jerry...
Mark
Translationhet betreft hier oud toestel 116 si
aan de trekker is geen breuk te bespeuren, alleen verbinding tussen trekker en gashendel is een raadsel, draadgaskoppeling met de opening in de hendel gaat wel maar dan dan staat de het haakje voor aansluiting met de carburator verkeerd
TranslationBedankt SimonHS voor je reactie
Men vind de hele demontage en montage van het toestel, naar een detailtekening van het verbindende gasklepkoppeling met gashendel onvindbaar
blijven zoeken tot iemand vind wel de oplossing weet
TranslationIk vind dit wel een rare montage, maar zie ook geen andere mogelijkheden als door u voorgestelde foto1 en mijn foto
Bedankt voor je reactie
yes that is how it works the trigger just pushes on the linkage no captured connection at the trigger the spring pressure holds the linkage back against the triggerIk vind dit wel een rare montage, maar zie ook geen andere mogelijkheden als door u voorgestelde foto1 en mijn foto
Bedankt voor je reactie
Enter your email address to join: