gsrsol84mm
ArboristSite Operative
Looking for a ported 550xp or ported Jonsered 2253.
Would take PHO as I want to run a 16" 3/8 chain and bar.
Thanks
Would take PHO as I want to run a 16" 3/8 chain and bar.
Thanks
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Want to Buy Looking for A Ported 550XP
- Thread starter gsrsol84mm
- Start date
Help Support Arborist Forum:
Bigfoot907
ArboristSite Lurker
Just showing mine off all polished up with a brand new 18” sugi hara.
mortalitool
ArboristSite Guru
I have a pretty clean ported 2253 I'd sell. Its setup to run 3/8 chain.
This video shows the ported cylinder on the 2252 I had. I swapped everything over to the 2253 when I got it. Same p/c for both saws.
This video shows the ported cylinder on the 2252 I had. I swapped everything over to the 2253 when I got it. Same p/c for both saws.
