Chev727
ArboristSite Operative
Been looking at pressure/vac testers and I like the mv8500 kit but was wondering what other kits everyone used and what's the best for the money
8500 for saws you cant go wrong.Been looking at pressure/vac testers and I like the mv8500 kit but was wondering what other kits everyone used and what's the best for the money
8500 for saws you cant go wrong.
Well what saw?Thanks for the reply wolf, that's what I was thinking too, I know baileys sells the rubber flap for the exhaust port but where do I get something for the intake boot?
Well what saw?
I make all mine.Trying to find something universal, but any place I can find something for any model I come across, I'd like to be able to test any saw I get without having to bug dozens of pieces, if possible, seen people use AV mounts with zip ties but that doesn't seem to reliable to me
Flat metal plate on the exhaust with rubber from tube as a gasket and I use an extra boot sealed with silicone on the intake.How do you go about making them? My thought was buying a bike tire tube and cutting the shape of the carb out and just putting it between the carb and boot but I worry about it leaking
Nice tip, l just yesterday recieved a Mityvac in the mail. lt seems to be a well made tool for the $$. l can see myself using mine for many years, for many applications. Do you do the spark plug mod where you drill it put a thingie fitting and some epoxy/resien ending up with an airtight spark plug hole adapter?? Or is it easier/best to buy one online ect?Flat metal plate on the exhaust with rubber from tube as a gasket and I use an extra boot sealed with silicone on the intake.
A lot of guys make them it will work I guess.Nice tip, l just yesterday recieved a Mityvac in the mail. lt seems to be a well made tool for the $$. l can see myself using mine for many years, for many applications. Do you do the spark plug mod where you drill it put a thingie fitting and some epoxy/resien ending up with an airtight spark plug hole adapter?? Or is it easier/best to buy one online ect?
i have use themBeen looking at pressure/vac testers and I like the mv8500 kit but was wondering what other kits everyone used and what's the best for the money
Yes it work with no problem.A lot of guys make them it will work I guess.
Make one its easy and cost= 0Nice tip, l just yesterday recieved a Mityvac in the mail. lt seems to be a well made tool for the $$. l can see myself using mine for many years, for many applications. Do you do the spark plug mod where you drill it put a thingie fitting and some epoxy/resien ending up with an airtight spark plug hole adapter?? Or is it easier/best to buy one online ect?
Only easy if you do it right.Make one its easy and cost= 0
Similar flat metal plate with rubber and for the intake side for the most saws , except theese with two holes intakesFlat metal plate on the exhaust with rubber from tube as a gasket and I use an extra boot sealed with silicone on the intake.
you know how pull out the porselan put in a tube and full it with epoxy its readyOnly easy if you do it right.
Never did one yet all the stihls I have use an impulse line.you know how pull out the porselan put in a tube and full it with epoxy its ready
its the same , i use impulse or plug, i have see a dolmar block that sent air from the exaustNever did one yet all the stihls I have use an impulse line.
I have not needed a plug yet is what i mean.its the same , i use impulse or plug, i have see a dolmar block that sent air from the exaust
Enter your email address to join: