Mn,wis,ia-gtg 10-09-10

[8433jeff]

You saw most of that saw before...

 

[Beefie]

How bout some names to go with the faces.

OK I will see If I can get this right.
Front row L-R 1.Sthlyinely 2.MNRipper 3.Heavyfuel 4.Huskey445 (?) 5.Woodyman 6. GrandpaTractor.
Back row L-R 7.GrizzlyAdams86 8. Thorw 9.Wendell 10.Mweba 11.(I can't think of the big guy in the black cutoff's name, need some help on that one) 12. Polekat? 13. ( I talked to this guy also and can't remember his name also) 14. Don and his wife brenda? Don gave here a chainsaw for there anniversary, She said she will give the racing a try at the next GTG, They are not AS members yet but I think Earl is working on that. 15. SteveNWWI 16. WetGunPowder(Boyd)The guy that never gets dirty, Check out his chaps in the charity cutting thread still look brand new. 17. The guy back buy the white truck is Allen he came with Jeff who is walking towards him in the green shirt(Can't remember his AS Name) 18. And the Guy that belongs to the shadow is yours truly Beefie(somebody had to take the pic)

 

[wendell]

OK I will see If I can get this right.
Front row L-R 1.Sthlyinely 2.MNRipper 3.Heavyfuel 4.Huskey445 (?) 5.Woodyman 6. GrandpaTractor.
Back row L-R 7.GrizzlyAdams86 8. Thorw 9.Wendell 10.Mweba 11.(I can't think of the big guy in the black cutoff's name, need some help on that one) 12. Polekat? 13. ( I talked to this guy also and can't remember his name also) 14. Don and his wife brenda? Don gave here a chainsaw for there anniversary, She said she will give the racing a try at the next GTG, They are not AS members yet but I think Earl is working on that. 15. SteveNWWI 16. WetGunPowder(Boyd)The guy that never gets dirty, Check out his chaps in the charity cutting thread still look brand new. 17. The guy back buy the white truck is Allen he came with Jeff who is walking towards him in the green shirt(Can't remember his AS Name) 18. And the Guy that belongs to the shadow is yours truly Beefie(somebody had to take the pic)

The guy way to the left (or right of Grizzly) is Pat, Woodyman's brother. 13 is Paul who made the fantastic vension/potato sausage.

 

[woodyman]

Hope this works.Wendell wedging a back leaning big red oak onto a running Mac 3200.When the tree hits the ground you can hear the chainsaw stop running.The noise you hear in the vid is the<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/upaswzhDsj8?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/upaswzhDsj8?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object> chainsaw running.Got a few more vids I will post this week.This was a big tree.<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/rc_x0O3258g?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/rc_x0O3258g?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[woodyman]

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/zdYOPwC6PII?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/zdYOPwC6PII?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object> Here is a vid of master sawman Stihlyinely.He took down this large willow and kept most of it out of the creek

 

[grandpatractor]

Hey woodyman, have we got any times we can post from the races.

 

[woodyman]

Hey woodyman, have we got any times we can post from the races.

I forgot all about them.I will have them up by the end of the week.I am working 12to13 hour days now and am very tired when I get home.The saw that Wendell dropped that tree on did not die but HeavyFuel took care of that in his own way with the right tools.Does anyone want to see it?<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/BlKAEGst3bg?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/BlKAEGst3bg?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[woodyman]

If dropping a tree on it and killing it with a skidsteer wasn't enough for this Mac 3200 had to make sure it was dead:jawdrop:<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/tYsbVNzrYdM?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/tYsbVNzrYdM?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[woodyman]

40cc & under

020-Wetgunpowder-25.94
Eager Beaver-grampatractor-28.93
334T-Husq445-17.72

41cc to 49cc

420-grampatractor-13.59
420-Steve NW WS-15.03
44-Pat my brother-21.43
445-Husq445-17.41
4400-MNRipper-13.81
420-grampatractor with Steve NW WS saw-12.88

50cc to 55cc

5100-Steve NW WS-38.84/24.64
346-woodyman-19.71
260-Stihlyinely-35.91
026-Polkat-21.15
350-Kedric-24.41
3450-Mitch-56.66
260-Beefie-61.46
260-Grizzlyadams86-51.94
5100-grampatractor-19.71
5100T-grampatractor-23.25
10-10-Grizzlyadams86-DNF
260-Pat-29.91
346-Wendell-30.15

56cc to 65cc

034 Super-Stilhyinely-13.19
361-Pat my brother-9.87
359-Grizzlyadams86-23.78
2156-HeavyFuel-8.31
359-Thorcw-8.75
6401-Thorcw-8.16
6401-grampatractor runing Thor's saw-7.88
6400-Polkat-8.84/8 pin 9.47
361-Beefie-14.53
L65-Grizzlyadams86-19.41
120 Sachs-Wetgunpowder-10.06
290-Husq445-10.69
56 Efco-Jeff-24.90/23.63
120 Sachs-grampatractor running Wetgunpowder's saw-11.68/11.37
2156-Rick running Heavyfuel's saw-7.75

The rest Friday night.

 

[grandpatractor]

Cool thanks woodyman!!:rockn:

 

[StihlyinEly]

Good start, Woodyman!

 

[HEAVY FUEL]

I see that ported 346 tied with that stock 5100. I guess there is hope yet!:hmm3grin2orange:

 

[birddogtg]

Could have $740 to $790 in that 346 after porting and shipping to get the same cutting speed of a 5100 Dolmar that is stock and is only $400. Makes sense to me.

 

[Steve NW WI]

41cc to 49cc

420-grampatractor-13.59
420-Steve NW WI-15.03
44-Pat my brother-21.43
445-Husq445-17.41
4400-MNRipper-13.81
420-grampatractor with Steve NW WI saw-12.88

That's the powersharp setup Boyd brought with, out of the box new. After dulling and a "hard" sharpening, I think it went about 20 sec. Tomorrow I'm gonna try a more finesse sharpening on it, and compare it to a new 91vxl. Results coming tomorrow night or Sunday.

50cc to 55cc

5100-Steve NW WI-38.84/24.64

The value of proper sharpening here - the first time was after a half hearted sharpening on the ground and in a hurry. In disgust, I went to JD's vice (gotta make me one of them), took my time and sharpened carefully, and took 14.2 seconds off the cut. Thanks to little bro for getting the chain dull enough to point this out! Maybe if this powersharp thing works out, I'll buy one for the old 290 and give it to him for xmas.

 

[birddogtg]

I guess after12 hrs that the 346 fans got no answer other then it handles better.

 

[wendell]

It appears you are lost. Never wise to PUI.

 

[woodyman]

I see that ported 346 tied with that stock 5100. I guess there is hope yet!:hmm3grin2orange:

Spring is just around the corner to.The 346 will be alittle sharper in the spring.I forgot I cut a few old 2x6's for the front of my trailer with it and did not resharpen it before racing SaturdayI had alot on my mind

 

[woodyman]

65cc to 75cc

Beefie-044-10.91
Rick-ported 372XPW(I want that saw)-6.71
Paul-2171-10.65
MnRipper-ECHO CS-671-15.25
Stihlyinely-ported 038 MAG-9.22
Wendell-7300-9.19
Mweba-372-9.53
HeavyFuel-7300-8.63

76cc to 85cc

grampatractor-7900-10.04
woodyman-7900-12.09(less than 4 tanks on it)
Stihlyinely-460-12.37
Wendell-7901-11.25
HeavyFuel-046-11.91
HeavyFuel-064-11.56
Polkat-6400-10.69(I hope I got the name right)
Jeff-480-55.63(thats why I sold mine)
Allen-910E-22.25
grampatractor-7900H-10.88
HeavyFuel-7900.11.21
Husq445-372XPW-9.21(I think it was ported)
Mitch-C-51-24.69
Thorcw-7900-10.78

85cc and up

Need a beer,be right back

 

[Steve NW WI]

hey woody, where's my time with the 7300?

 

[wendell]

That's a heck of a time for my 7300 considering I didn't bring it this time.

I know my 346 time wasn't right so maybe there is some mix up?