ms660 carb issue

[68kaiser]

This saw has kicked my --- today. I needed to rebuild the carb and got a kit. Installed it and have messed with it all day. I can get the saw to run for a minute but it is hard to start, smokes, or just floods out.
The carb is a walbro WJ-69. I got a kit from baileys and they gave me a kit and the number for it is K10-WJ and they where not to shure if it was the correct kit for my carb.

I preassure tested the carb and crankcase both solid, thou i did not vacume test the crank case. Fuel lines all seem good the tank holds preasure. Any help would be to good for words.

 

[Stihl-Pioneer]

I believe the kit you need is K15-WJ. I don't know what diff there is between a K10 and K15.

 

[68kaiser]

I researched and came up with the K-15 also. I dont know what the differance is between the two either. Thanks for the reply.