HI i have a 357 xp saw and am having problems with the carb settings, I changed the head and piston recently but when i put it back together it would not start,
problems i am experiening are
flooding
not starting runs on choke only then dies
does not tik over ( i have adjusted tick but no joy )
its a 2009 model
and also it seems to be building air pressure in the tank, any ideas?
cheers:frown:
problems i am experiening are
flooding
not starting runs on choke only then dies
does not tik over ( i have adjusted tick but no joy )
its a 2009 model
and also it seems to be building air pressure in the tank, any ideas?
cheers:frown: