Sold NOS bars.

[daryng]

So my dad used to run a hardware store out of our shop that primarily sold damaged freight and returns. He shut the store down in the late 90's due to loss of his supplier and his hoarding began to take over. I've cleaned a path and did some looking this evening and I found these treasures. They are all new vintage Oregons and were in their original sleeves.

They are:

SOLD Shindaiwa Branded Oregon Prolite 20" .325 .050 78DL K095 small husky mount. Shows some handling wear but still new

$25 shipped OBO



Oregon Pro 91 14" 3/8LP not sure of the DL or gauge. Consumer Homelite mount

Free if you pay the shipping



SOLD Oregon Pro-Lite 18" .325 .050 74DL D025 Stihl Mount

$30 shipped OBO



Oregon Power Match 20" 3/8 .050 70DL D196 Homelite Mount

$25 shipped OBO


Oregon Pro lite 18" 3/8" .050 64DL D196 Homelite Mount

$22 shipped OBO



Oregon Power Match 18" 3/8" .058 64DL Z095 Small husky mount. (I got excited when I found this one, but saw the odd DL and .058 so.....)

$20 shipped OBO



All prices are negotiable.

thanks

 

[cgraham1]

@Four Paws needs that Shindaiwa bar.

 

[Four Paws]

@Four Paws needs that Shindaiwa bar.

@Jon1212 made sure I had some!

 

[Jon1212]

@Jon1212 made sure I had some!

Yeah, just a few...............


By the way, @daryng you may want to check that Shindaiwa bar. It looks to be a K041 to me. Look to see if it oils through the adjuster holes.
Also, your 3/8lp 14" is 050 gauge based off of the P/N on the sleeve.

 

[sunfish]

Oregon Power Match 18" 3/8" .058 64DL Z095 Small husky mount. (I got excited when I found this one, but saw the odd DL and .058 so.....)

Not so odd, I have 7 or 8 bars same DL and .058. It's what I run most of the time.

Good prices on these bars.

 

[daryng]

Yeah, just a few...............


By the way, @daryng you may want to check that Shindaiwa bar. It looks to be a K041 to me. Look to see if it oils through the adjuster holes.
Also, your 3/8lp 14" is 050 gauge based off of the P/N on the sleeve.

You are right! The bar masters keen eye spotted it from just a small picture. If one so desires I can make it into a K095 mount.

Not so odd, I have 7 or 8 bars same DL and .058. It's what I run most of the time.

Good prices on these bars.

I had never seen a 64dl 18" before. would it technically be a 17". I held it up to a standard 18" and it is quite a bit shorter.

 

[sunfish]

I had never seen a 64dl 18" before. would it technically be a 17". I held it up to a standard 18" and it is quite a bit shorter.

They are shorter than current 18" bars, but were the norm years ago. The ones I have are Windsor speed tips. Several places list 64 DL chain loops, I ordered a few recently.

 

[Jon1212]

I had a whole stack of Windsor/ Sandvik 18" 3/8 050 64dl Stihl 3003 bars.

 

[albert]

I'll take the D196 bar.

 

[redoakneck]

Pm sent on the shindawa,

 

[daryng]

Stihl Pro Lite is sold

 

[daryng]

Shindaiwa bar is sold.

Both 18" and 20" Homelite mount bars are sold pending payment

Free small homelite bar and small husky 18" are still available

 

[KMSwr]

Yeah, just a few...............


By the way, @daryng you may want to check that Shindaiwa bar. It looks to be a K041 to me. Look to see if it oils through the adjuster holes.
Also, your 3/8lp 14" is 050 gauge based off of the P/N on the sleeve.

Does anyone have a bar for sale 050,3/8,20 inch for stihl 034,nothing fancy,new or used depending on price

 

[zr900]

Do you still have the small homelite pro 91 bar?
Do you have a guess on how much to ship to 49047

 

[hunter72]

I would like the power match 18" 3/8 64dl. small mount Husq. bar if not taken.
Thanks

 

[daryng]

Do you still have the small homelite pro 91 bar?
Do you have a guess on how much to ship to 49047

pm sending

 

[daryng]

I would like the power match 18" 3/8 64dl. small mount Husq. bar if not taken.
Thanks

pm sending