• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell OEM cylinders

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Trent Curtis

ArboristSite Guru
Joined
Sep 29, 2016
Messages
724
Reaction score
839
Location
Boise, ID
2CE88765-C470-4A8C-BFF9-9172C4093CAF.jpegThinning the boxes of cylinders..... I’m pretty certain I’ve got each model correct but please let me know if you see anything that’s incorrect.

note- the 394 cylinder has a piece missing where the cylinder skirt drops into the case. Won’t effect performance one bit..... but it’s there. It was actually cracked so I just snapped it off. Better to snap off and NOT drop into the crank.

the 272 cylinder has been cleaned up on the exhaust side- will be a runner but isn’t pristine.

The 181 cylinder was molested by some hack who enlarged the combustion chamber..... no idea why. Believe it or not that saw also had 4 base gaskets stacked as well...... he was going for a new porting concept I guess??? Increase head space and lower compression :) cylinder would work if your going to turn on a lathe to deck and cut squish. I ll throw it in free with the 181 pistons/rings.

All the other cylinders are good. All cylinders are used. All prices are TYD
  1. Mahle48zn5+ (162) $75
  2. Mahle 54zn13 w2 with decomp (288) $100
  3. Mahle 56zn9 w2 (394) $100
  4. Husqvarna 5219301 (372XT) $50
  5. Mahle ++++ 52zn20 (Jred 2088) $80
  6. Mahle ++++ 50zn21 (365 OE) $60
  7. (2) 181 thin ring pistons.... w (1) NOS set thin rings $100
  8. Mahle 52zn22 (272) $40
  9. Complete 372xt top end w intake trac $100

  10. 365xt cylinder $65

  11. $004 1-B (181) $40 needs work on combustion chamber
  12. Husqvarna 359 cylinder $75
 
Sounds like he was getting ready to add a turbo to that 181, not sure those gaskets would have worked, should have cut the base off another cylinder for it :laugh:.
GLWS

It’s hard to start for the PO so he spaced the cylinder higher, less compression. I never knew about guys that can’t start chainsaws. I sold a ms250e to a guy who had problems starting saws.
 
Back
Top