Pioneer Holiday 1100W G-Series Crankshaft nut size??

[Michael G]

Trying to bring this old saw back to life. It was the first I ever touched. Didn't know anything about stopping piston or how to remove the nuts so I cut them off.

Got it to fire on choke and didn't know anything about cleaning carb, checking lines, or anything so I started going berserk on it.

Big question I have is anyone know the size of the nut for the crankshaft? And the ordering of the sprocket and washers? Or a manual?

 

[s sidewall]

Vintage Chainsaw Collectors Lounge, try there for info one your saw, for a manual, go to beg for manuals. Someone should be able to help you. Welcome to arboristsite. See you're a Ga boy too.

Steve, Samsung On5 using Tapatalk

 

[s sidewall]

If you had a thread pitch gauge, may help unless it left handed threads.

Steve, Samsung On5 using Tapatalk

 

[Little Al]

Just look at the thread on the end of the crankshaft if the thread looks strange it's left hand it will be either NF or NC pitch not Metric

 

[Little Al]

Scott at Chainsawr has a crank/flywheel nut for a P1100 Don't know if this is correct one. Page 4/5 ? of his Pioneer parts for sale