Rednecked an end cap poly pipe, cutter is worn raker flat file i grind into shape.
Chattered due to some nicks on the squish from bearing thrown around when piston seized on this junk cylinder.
Otherwise cuts good, only downside is probably measuring depth of cut.
Need to figure easier way to measure, putting it on the case back and forth is time consuming
Chattered due to some nicks on the squish from bearing thrown around when piston seized on this junk cylinder.
Otherwise cuts good, only downside is probably measuring depth of cut.
Need to figure easier way to measure, putting it on the case back and forth is time consuming