dougand3
Addicted to ArboristSite
Craftsman 358362180 / Redmax GZ4000. 18“ OEM A041 bar 3/8LP chain 62 DL
Got this saw as a trade in. P&C were rough from probable leaky intake seal - lean running.
Installed a McCulloch 4018 P&C with Base Gasket Delete.
Adapted a Chinese 45cc carb to run saw as non-strato with non strato insulator. New fuel Line.
Choke rod is homemade but works fine. High Idle is a cable tie.
Runs good. Oiler works. High Idle required for cold starts or after 3 mins cool down.
Will include old Zama strato carb, choke rod, strato insulator, gasket, old jug (you may want to mess with it). To use strato carb, will probably need RedMax 522648601 seal inside the insulator. ~$18.
$175 OBO + shipping 18# from 35801. Paypal. Thanks, Doug
Got this saw as a trade in. P&C were rough from probable leaky intake seal - lean running.
Installed a McCulloch 4018 P&C with Base Gasket Delete.
Adapted a Chinese 45cc carb to run saw as non-strato with non strato insulator. New fuel Line.
Choke rod is homemade but works fine. High Idle is a cable tie.
Runs good. Oiler works. High Idle required for cold starts or after 3 mins cool down.
Will include old Zama strato carb, choke rod, strato insulator, gasket, old jug (you may want to mess with it). To use strato carb, will probably need RedMax 522648601 seal inside the insulator. ~$18.
$175 OBO + shipping 18# from 35801. Paypal. Thanks, Doug
