Brian Carlson
ArboristSite Guru
- Joined
- Sep 21, 2014
- Messages
- 599
- Reaction score
- 265
Up for sale is a Stihl 044 pho. I bought the saw partially disassembled. It has new aftermarket carb, fuel line, impulse line, dual port muffler, and top handle. I left the crank seals alone. It has a oem piston, jug and rings. It does have a little scratch just above the rings on the piston but the saw runs great. I can't remember what size wrist pin is in it but I believe it was a 12mm. The compression reading I got was a shade over 140 but my setup doesn't seal well against the head. The saw can be picked up from the pull handle and will not try to walk the rope for quite a few seconds. There are two base gaskets installed because with only one gasket it would hit the top of the jug. This jug has no decompression vale port on it. I don't know why the clearance is so tight because I can't find where anyone modified it. I would like $450 shipped in the lower 48. If you have any questions just ask.
Attachments
-
IMAG0318.jpg2.1 MB · Views: 194
-
IMAG0319.jpg2 MB · Views: 205
-
IMAG0320.jpg1.9 MB · Views: 207
-
IMAG0321.jpg2.2 MB · Views: 200
-
IMAG0322.jpg2.1 MB · Views: 195
-
IMAG0323.jpg2.2 MB · Views: 182
-
IMAG0324.jpg1.1 MB · Views: 174
-
IMAG0325.jpg593 KB · Views: 169
-
IMAG0326.jpg810.1 KB · Views: 175
-
IMAG0328.jpg951.5 KB · Views: 150