Sold Stihl OEM 044 Parts

[mikerudder]

In the process of doing a build on a 12mm 044 and need the following parts to get it going (dealers??)

I believe the part numbers are all correct (prefer to keep this whole saw OEM), but let me know if I am wrong so I can change it!

Gasket Kit/seals 1128 007 1050
Crank Bearings (9503 003 0346 and 9523 003 4275)
Impulse line 1128 141 8600
Fuel line 1128 358 7701
Fuel Filter 0000 350 3504
Oil Line 1128 647 9405
Oil Filter 1117 640 3800
Wrist Pin 1128 034 1501
Needle Bearing 9512 003 3061
Circlips 9463 650 1200 x2
Piston Rings 1128 034 3000 x2
Air Filter (HD)
Carb Kit for Zama C3M (RB-36?)

 

[maulhead]

In the process of doing a build on a 12mm 044 and need the following parts to get it going (dealers??)

I believe the part numbers are all correct (prefer to keep this whole saw OEM), but let me know if I am wrong so I can change it!

Gasket Kit/seals 1128 007 1050
Crank Bearings (9503 003 0364 and 9523 003 4275)
Impulse line 1128 141 8600
Fuel line 1128 358 7701
Fuel Filter 0000 350 3504
Oil Line 1128 647 9405
Oil Filter 1117 640 3800
Wrist Pin 1128 034 1501
Needle Bearing 9512 003 3061
Circlips 9463 650 1200 x2
Piston Rings 1128 034 3000 x2
Air Filter (HD)
Carb Kit for Zama C3M (RB-36?)

Merhaps a typo on the flywheel side bearing number? I think your looking for 9503 003 0346, not 9503 003 0364

 

[mikerudder]

Merhaps a typo on the flywheel side bearing number? I think your looking for 9503 003 0346, not 9503 003 0364

yep bit of a typo, thanks!

 

[mikerudder]

So I got my quote back from the Stihl dealership

$350 for everything (I opted for the piston kit as noted above)

Any dealers out there want to chime in? Seems outrageously high to me.

 

[tug]

In the process of doing a build on a 12mm 044 and need the following parts to get it going (dealers??)

I believe the part numbers are all correct (prefer to keep this whole saw OEM), but let me know if I am wrong so I can change it!

Gasket Kit/seals 1128 007 1050 $38
Crank Bearings (9503 003 0346 and 9523 003 4275) $20 each
Impulse line 1128 141 8600 $6
Fuel line 1128 358 7701 $15
Fuel Filter 0000 350 3504 $7
Oil Line 1128 647 9405
Oil Filter 1117 640 3800
Wrist Pin 1128 034 1501
Needle Bearing 9512 003 3061 $17
Circlips 9463 650 1200 x2
Piston Rings 1128 034 3000 x2
Air Filter (HD)
Carb Kit for Zama C3M (RB-36?)

I have been trying to fix a 046 and 044 the parts add up. I went with meteror piston and caber rings and you can use a regular 6202 bearing on the fly wheel side. I put the prices that I paid above. You can put the part numbers into the search bar of baileys website. Although they are not a stihl dealership and they charge more on stihl parts, they stock parts for some stihls 044,046,and 066. I think a piston kit which is the piston, the piston pin ,circlips and rings is around $90

 

[treegear]

PM sent

 

[fl cracker]

I can get meteor kits for 30 bucks verses 90 from stealer. I have a good used oem 12 mm piston id sell i pulled out of my runner to do a hybrid build if this helps let me know. Yes prices are high i just got a bearing and seal kit for a 361 it was over 60 bucks. I can get the 6202 in a skf for just under 10 bucks to save a few bucks there.let me know be glad to help as much as i can.

 

[mikerudder]

Thanks, I ordered parts from the dealer and found a new piston already

I might need a few small parts but we will see when they get here!