klickitatsacket
Addicted to ArboristSite
- Joined
- Dec 3, 2004
- Messages
- 2,051
- Reaction score
- 285
Just thought I would show off the opstical pole saw now that I have the pipe retuned and everything is ready to go.
- Full port and polished cylinder
- Heavily worked piston
- Rollor nose bar
- Chain by Greg Brewer
- 046 Carburetor
- Tuned exhaust
- Tuned intake
- RPM in the cut is conciderably over 14K
I will not post actual #'s as we are sponsoring TJ Bexton this year with it and he will be using it.
http://i5.photobucket.com/albums/y186/klickitat/026_2629.jpg
- Full port and polished cylinder
- Heavily worked piston
- Rollor nose bar
- Chain by Greg Brewer
- 046 Carburetor
- Tuned exhaust
- Tuned intake
- RPM in the cut is conciderably over 14K
I will not post actual #'s as we are sponsoring TJ Bexton this year with it and he will be using it.
http://i5.photobucket.com/albums/y186/klickitat/026_2629.jpg