The 026 Ready To Go

[klickitatsacket]

Just thought I would show off the opstical pole saw now that I have the pipe retuned and everything is ready to go.
- Full port and polished cylinder
- Heavily worked piston
- Rollor nose bar
- Chain by Greg Brewer
- 046 Carburetor
- Tuned exhaust
- Tuned intake
- RPM in the cut is conciderably over 14K

I will not post actual #'s as we are sponsoring TJ Bexton this year with it and he will be using it.

http://i5.photobucket.com/albums/y186/klickitat/026_2629.jpg

 

[Kneejerk Bombas]

Real pretty looking saw. How about a close up of the chain?

 

[ShoerFast]

Dean

I will be building a woods-ported MS-460 to beat Slimon's 460, I would race your 260 while I'm at it?

As I'm not a builder, I wouldent feel bad if your 260 beat mine!

Kevin

 

[West Texas]

How long is the bar on that beast Dean?

 

[Ax-man]

That is a work of art, COOLmakes me want to make the 026 I have been piddling with to look like that.

Larry

 

[klickitatsacket]

The bar is 20". I will ask Greg Brewer if he wants close ups on his chain or not. That one is not my call. I believe TJ is going to run a 12" bar and his own chain for the OP races. TJ builds a fast chain and if I remember right took first place last year on the west coast in points for stock saw chain race. BTW thanks guys. I just hope that it places well this season.

 

[Kneejerk Bombas]

If not a close up, can you tell us how it is colored?

 

[Gypo Logger]

Nice job Dean. Very similar to a saw I built for Rotax Robert.
John

http://img.photobucket.com/albums/v639/sunlover3/Special pictures/Trees/346Rotax.jpg

 

[klickitatsacket]

If not a close up, can you tell us how it is colored?

Greg used an ink on it. This chain as pictured actually had to have a run on it to find the high spots. Then go back and polish those in line. this gets done 3 or 4 times.