Washington county saw race Jackson Wi

[z4lunch]

Wcf

Steve here... Unfortunatley I may not have time to run any of my saws this year... Sold my house... in the process ofbuilding a new one and most of my stuff is in a 10X30... actually two 10X30's
I might run the West Bend and the 090 but that would be it... If I have time to practice this week...
The 7900 Scott speaks of is still in the box it came in, as well as my 372Xp and my Ms440. The 088KD is back to a lowly woods saw only, and is packed away till next year.

Any questions please pm me or email me...

Please get to the fair early... registaqtion closes at 6:30 sharp
Enter at the NE gate... There should be a Gator there to hall saws into the fair.
Steve

 

[McC]

Getting there early is a very good idea. This is a huge county fair, and the traffic backs-up on the 4 lane around 6:00, then finding parking, park in the north lot, then getting all your equipment from the parking lot to the show ring. When you park, look for an attendant, they will call a Gator for you, to haul your saws. It's worth the trouble. This is a well run event, and the couple hundred spectators really get into it.
Here's a link to the fair. There's a map of the grounds at the bottom of the page.
http://www.wcfairpark.com/fair.php
The attachment is a pdf file of the rules.
Steve, I hope you have time to practice!
Scott

 

[z4lunch]

Wcf

Hey everyone its Juley!
Just wanted to wish everyone luck at Washington County Fair and I wish I could be there! I heard that there was going to be a class there this year just for woman and Im really excited! Hope all of the girls kick butt and show everyone up!

Juley,
Just got off the phone with your dad...
Wish you could make it
Steve

 

[z4lunch]

Wcf 2007

Steve here... I want to thank everyone that showed up at the race last night.
We had 79 entries. The first 3 classes made three cuts in 6X6 cotton wood. The wood was left over from last year and very dry. The womens class ran one cut in a 10X10, with a donated Dolmar 5100. All the other classes made three cuts in a 10X10 cotton wood cant.

32-45cc
Paul M Mac BP1 8.35
Scott M Mac BP1 9.95
Jeff K Poulan 10.92

46-56cc
Les B Jonsereds 621 7.16
Scott M Dolmar 5100 7.5
David K Stihl ms290 7.69

57-67cc
Dan W Dolmar 6400 4.95
Paul M Husky 266 6.06
Chris B Stihl 041 6.93

68-80cc
Scott M Dolmar 7900 10.85
Dan W Dolmar 7900 11.67
Daryl S Stihl MS440 12.51

81-93cc
Trent N Stihl 066 12.50
Daryl S Stihl MS440 12.75
Addison Dolmar 7900 13.15

94-114cc
Mark M Homelite 750 10.60
Les B Mac 105 11.44
Jeff S Mac 17.29

115cc-UP
Steve M Stihl 090AV 9.66
Trent N Stihl 090AV 12.37
Josh G Husky 3120 12.78

Womens Stock
Lynn N 8.62
Brenda S 9.02
DeAnna R 9.99

Mod/Hotsaw
Steve M Wards WD-99 5.39
Scott M Mac 250/MC92 6.93
Les B Mac101 7.85

 

[Juley Born]

Just wanted to say great job to you all! I heard that it was a great turnout and that everyone did really well last night! A BIG congrats to all of the ladies too...I hope that I can join you next year!

 

[McC]

A big Thanks to Steve and the sponsors, Ackerville Lawn and Garden of Slinger, and Barton Small Engine of West Bend.
Here are some pics.

 

[McC]

More Pics

 

[McC]

Here is Steve with the big 090, winner of class 7.

 

[Cut4fun]

Thanks for the pics and times guys. Looks like a good turn out.

McC, any video's going on youtube to watch later?

 

[z4lunch]

Wcf 2007

Steve here... Here are 3 hot saw clips from Saturday night.
Scott, Les and myself... Had to load them into Photobucket, AS wouldn't load them for some reason
Steve

 

[Cut4fun]

z4, Thanks for the video fix.

Stands seemed to be quite high. :help:

 

[McC]

Here are 3 videos. More to come, it takes my G3 a while to crunch these into mp4's.
Paul M 1st place 45cc and under Mac BP1
http://www.youtube.com/watch?v=gvMM_2jMmZg
Les B 1st place 46-56cc Johnse 621
http://www.youtube.com/watch?v=rHuli6Z2iH8
Scott M "McC" 2nd place 46-56cc Dolmar 5100
http://www.youtube.com/watch?v=L5LumHBug1o
Scott

 

[McC]

More video links:
Bruce M Stihl 041
http://www.youtube.com/watch?v=iRUZxhyf-64
Paul M Husky 266 2nd place 57-67cc
http://www.youtube.com/watch?v=7_PkBBSTB00
Scott M "McC" Mac 250
http://www.youtube.com/watch?v=2GJL3scFmwk
Paul M Husky 575
http://www.youtube.com/watch?v=_q6-oXtBgt8
Bruce M Homelite 450
http://www.youtube.com/watch?v=TWJiVnqzve4
Paul M Husky 271
http://www.youtube.com/watch?v=sMAuOaM5Lys

 

[McC]

some more videos
Bruce M Homelite C5
http://www.youtube.com/watch?v=ceR_xrB3TPU
Scot M Dolmar 7900
1st place 68-80cc
http://www.youtube.com/watch?v=XDNm3Avx-6c
Paul M Husky288
http://www.youtube.com/watch?v=C1rIFo4Y7zk
Bruce M Pioneer 600 with 10 tooth 404 sprocket
http://www.youtube.com/watch?v=KxRTru0Nk14
Les B Mac 105
http://www.youtube.com/watch?v=x1piFGTBgog
"The Terminator" running a Lancaster with west bend 820
http://www.youtube.com/watch?v=BZJSsZYcWsU

 

[McC]

This is the last of my videos for this years race.
My video of me running my MC92 hotsaw didn't turn out very well. Steve posted his video of me earlier in thread.

Carrie in womens class:
http://www.youtube.com/watch?v=13fjC7vj3IM
Another woman competing, sorry, don't remember name:
http://www.youtube.com/watch?v=R5LWKszVchI
Steve M Montgomery Wards with 820 West Bend 1st place:
http://www.youtube.com/watch?v=swxrTt-wINI
Paul M Mac with MC93 Kart engine 100cc
http://www.youtube.com/watch?v=1p9aIa7AXDw
Les B Mac MC101 Kart engine:
http://www.youtube.com/watch?v=7YUKM0-PMfY

 

[z4lunch]

Washington County saw race

Wcf 2008
Steve here... I want to thank everyone that showed up at the race last night.
We had 69 entries. The first 3 classes made three cuts in 9X9 cotton wood. . The womens class ran one cut in a 10X10, with a donated Husky. All the other classes made three cuts in a 10X10 cotton wood cant.

32-45cc
Rob Mc Husky 44 20.58
Chris B Poulan 49.5
Jeremy B Husky 240 57.01

46-56cc
Scott M Dolmar 5100 18.4
David K Stihl 290 18.3
Jeremy B Husky 346 21.8

57-67cc
Dan W Dolmar 6400 11.8
Ben K Husky 365 14.65
Jeremy B Husky 357 15.22

68-80cc
Scott M Dolmar 7900 10.88
Daryl S Stihl MS440 11.85
Dan W Dolmar 7900 11.93

81-93cc
Steve M Stihl 066 10.12
Daryl S Stihl MS440 11.99
Ben K Husky 385 14.82

94-114cc
Les B Mac 105 9.80
Steve M Stihl 066 10.02
Rob Mc Husky 281 15.84

115cc-UP
Daryl S Stihl MS880 7.60
Les B Mac 125 10.27
Trent N Stihl 090av 11.40




Mod/Hotsaw
EJ Mc Husky 3120 3.75
EJ Mc Atlas kart 3.85
Rob Mc Husky 3120 4.52

Les B Mac101 7.85

 

[Madsaw]

Steve, and Scott and others,
I was just wondering if you noticed we are going to try a event at our antique club show this year down in darlington. Bill G has offered to help out and we are looking for more folks to join us. I have posted a thread here about it already.
Thanks
Bob