Opened up the access holes today and found out what's going on. There was a splice right at the first lower access hole. The splicing hardware is about 10 inches long. The hose under the splice popped out.
I'll just cut a small piece out, reconnect and fill up the fluid, soap and power wash all the oil off the truck.
Question: do I need, if so how do I prime the lines or just that line? Do I just crack open the fitting of that line on top? Thx. Erwin
I'll just cut a small piece out, reconnect and fill up the fluid, soap and power wash all the oil off the truck.
Question: do I need, if so how do I prime the lines or just that line? Do I just crack open the fitting of that line on top? Thx. Erwin