Who starts their saws with the chainbreak off?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
MikeInParadise

MikeInParadise

ArboristSite Guru
Joined
Dec 22, 2005
Messages
669
Location
Paradise,NL
Interesting. My first 4 saws had no chain brakes. Now that I have saws with chain brakes I use them when I start the saw.

I just put the chain brake on and pull the cord while I am holding the saw. When it starts, blip the throttle and its good to go.

I have still a scar on my knee from using a chainsaw when I was 15 years old (Standing on a fallen tree limbing it when the bottom branches broke :cry:
DUH, hey I was young! )

Better safe than sorry and I could care less if I am considered a wussy :D

Now I must be an ignorant wussy :confused: cause I don't know exactly what is meant by "Drop Starting" a saw?

Anyone care to enlighten me?
 
whatsnext

whatsnext

ArboristSite Operative
Joined
Mar 18, 2005
Messages
443
Location
KCMO
A little late the the thread but I always thought the chain break was a safety device not a starting aid. I drop start my saws and would think reaching over the brake on a running saw is a recipe for a few lost finger tips. I don't think drop starting is that manly but it's much easier on your back not having to stoop over to pull.
John..
 
musher

musher

ArboristSite Operative
Joined
May 23, 2005
Messages
115
Location
Sherburne County, Minnesota
It's not a starting aid, but if you've got the "master control lever" at the "warm start" position (at least on a Stihl), it keeps the chain from moving as the saw tries to rev, until you can 'blip' the throttle and kick it out of "warm start" and into the idle positon.
 
ozflea

ozflea

Good ol' BP Zoom 25-1
Joined
Dec 9, 2004
Messages
3,881
Location
NSW or is it QLD .. Australia
I'm outta here, drop starting chainsaws with sharp flesh and bone cutting ability is not my scene (shudder) if all the accidents that happen each year world wide were anaylized i wonder how many would be caused by drop starting a chainsaw,

I for one won't do it as legs don't grow back.

The mark of a real real man is having one leg to prove it.

Mc Bob.
 
Bad E

Bad E

ArboristSite Operative
Joined
Dec 24, 2005
Messages
202
Location
ny
I just grab the bar with my left hand, pull the starter cord with my right. If thats drop starting I've been doing it for 25 yrs. Still have both legs, ten fingers, nine toes and my left gonad. :laugh:
 
TimberPig

TimberPig

ArboristSite Guru
Joined
Feb 25, 2005
Messages
849
Location
BC
Bad E said:
I just grab the bar with my left hand, pull the starter cord with my right. If thats drop starting I've been doing it for 25 yrs. Still have both legs, ten fingers, nine toes and my left gonad. :laugh:

That would be drop starting.

I very rarely start a saw on the ground, and sometimes put the brake on, mostly when starting it cold on fast idle. Blip the throttle then pop the brake off and let it warm up. Once its warm, the brake rarely goes on, mostly when walking down a tree between cuts.
 

PWB

ArboristSite Guru
Joined
Jun 2, 2005
Messages
513
Location
sw ontario
Lakeside53 said:
There is one I'm starting on the ground, 'cos I;m not sure if I'm man enough to drop start my 088! I'm going to need some practise!!!

It'll drop start (at least my 084 will anyway)

Try it sometime when the saw is warm.
 
sawn_penn

sawn_penn

ArboristSite Guru
Joined
Feb 1, 2006
Messages
577
Location
Australia
whatsnext said:
A little late the the thread but I always thought the chain break was a safety device not a starting aid. I drop start my saws and would think reaching over the brake on a running saw is a recipe for a few lost finger tips. I don't think drop starting is that manly but it's much easier on your back not having to stoop over to pull.
John..

Interesting to see how many opinions there are, and how few people seem to start with the brake on.

I was first exposed to chainsaws through the local volunteer emergency service. We did a lot of tree vs house jobs. Everything was very by-the-book. Umm, well everything to do with chainsaws was by-the-book anyway. :^)

I'm happy to acknowledge that experience often produces more streamlined work practices than are found in "the book".

I went searching for starting instructions in manuals, and found that recent Stihl, Husqvarna, and Jonsered manuals said "brake on". The McCulloch manual said nothing, and the Australian Standard for chainsaw operation (AS2727) said "brake on" too. A New Zealand (NZ has lots of forestry)government publication said "brake off".

Thanks for all the feedback. I've got a couple more "who breaks this rule?" threads to start!
 

Mr.

being watched
Joined
Dec 9, 2005
Messages
1,833
Location
Arkansas
I guess I never thought about how to start a saw. I just grab the handlebar, ignore the decomp and let her rip. Don't drop it, just hold it rigid.

Please don't step on my saw.;)

Fred
 
SawTroll

SawTroll

Information Collector
Joined
Jan 13, 2005
Messages
64,856
Location
Troms, North Norway
musher said:
It's not a starting aid, but if you've got the "master control lever" at the "warm start" position (at least on a Stihl), it keeps the chain from moving as the saw tries to rev, until you can 'blip' the throttle and kick it out of "warm start" and into the idle positon.
If the saw is properly tuned, there is no reason to use that position ("fast idle") when the saw is warm.
"On" is good enough.

As for "drop starting", that expression does not describe one spesific way of starting the saw in my mind.
It just describes the prinsiple of moving the saw and the starter handle in opposite directions to start the saw.
 
Top