This may help a little:
I "speak Windsor" pretty good, so if you can post a few questions I'd be happy to answer them. Also have a few Windsor books at the store.
UXL might be a Homelite mount. Not sure on that one.
This may help a little:
You dont happen to have one of those for sprockets/drums do you?
A very knowlegable member indicated that a UXL is very close to a D007 mount
A very knowlegable member indicated that a UXL is very close to a D007 mount
Both have a 9.5mm slot, as far as I know.
well spoke Troll.
Both do have 9.5mm slots... The only difference is that the oil holes are positioned a little differently and the chain adjuster hole is a little smaller on the Pioneer (D007) mount vs the Homelite (D096/D196)
Either way it's good ol' Windsor/Sandvik steel and will probably become a D009 since it's also 9.5mm. Maybe, D025 if I feel like making Mike mill it out for me. :msp_biggrin:
Hi i have a few bars i am trying to identify of you could help i would be very grateful!I "speak Windsor" pretty good, so if you can post a few questions I'd be happy to answer them. Also have a few Windsor books at the store.
UXL might be a Homelite mount. Not sure on that one.
Hey just happened to come into possesion of a really old McCulloch SP81 and it had this old rusty bar on it. After cleaning off the surface rust the bar is back to new and i can make out a windsor number 28TMX58SNA I've deduced its definitely an 11 link tail 28" but 58SNA I'm not sure about I'm assuming 58 means 0.058 gauge but no clue what SNA means
Enter your email address to join: