treevet
Addicted to ArboristSite
You guys don't talk much Mike. New cam is doing a nice job. Gonna get some poo from the a safety police re. double tie in. You use that walnut for firewood or lumber?
You guys don't talk much Mike. New cam is doing a nice job. Gonna get some poo from the a safety police re. double tie in. You use that walnut for firewood or lumber?
Gonna get some poo from the a safety police re. double tie in.
You use that walnut for firewood or lumber?
We try not to talk much. I push hand signals pretty hard. It was really noisy there and there was another tree service 2 houses down.
.
Today's agenda
[video=youtube_share;P3QuKCmfiMA]http://youtu.be/P3QuKCmfiMA[/video]
Did a 3 tree trim at a residence today and for the last week my truck has started to skip.a beat u guess you could call it. Just driving down the road its like you turn the key off and then back on. I know its electrical cause when it does it the wait to start dash light comes on (97 international 444) well did it.a couple times on way to job and while trimming the last tree it did it and stalled while 40' up? Guess I don't go alone on jobs anymore but any ideas?
was the lower boom section verticle or was it at some sort of angle? cause if you get to the "drop off" with out a plan your srewed! but yes bad plan...
but here is a question how many of you guys go up in the bucket with a climb line? because the co. I work for (provided your never alone) nobody goes up with a climb line in the bucket...
Sounds like a relay switch going bad, they are cheap, but they are many! Check them all, even the hidden ones up under the dash, mine are behind the glove box, there are 12 of them back there, control most of the engine electronics.
Its wet because I just picked it up from the detail shop. As you can see, it has its own porty attachment point and a 1 point hitch, comes with a heavy duty attachment lanyard. The last pic is of the optional clean up tool, makes short work of the 1/2 mile yards, up hill, both ways. Videos coming soon of how I use this absolutely, perfect piece of equipment. I have ordered a saw head from a feller buncher to mount on the front. Then I will be able to remove DANGEROUS trees with it. My skid loader was stuck yesterday, high centered in waist deep slop, no problem, just hooked up the winch to the back of it and pulled it out with the biener, man this thing is beast. Waiting for the new mounting plate so I can hook my dump trailer to it. That will make jobs easier as I wont have to hall my blower/vac anymore. I yeah I forgot about that, also comes with a optional blower/vac combo. I will get it mounted up and get more pics. One last thing, it has so much power that I have been taking it to the drag races. 10.24 in the 1/4 with a .0000009 light. WASUUUUUP
I like your shadow. Is that a 1911?
Its wet because I just picked it up from the detail shop. As you can see, it has its own porty attachment point and a 1 point hitch, comes with a heavy duty attachment lanyard. The last pic is of the optional clean up tool, makes short work of the 1/2 mile yards, up hill, both ways. Videos coming soon of how I use this absolutely, perfect piece of equipment. I have ordered a saw head from a feller buncher to mount on the front. Then I will be able to remove DANGEROUS trees with it. My skid loader was stuck yesterday, high centered in waist deep slop, no problem, just hooked up the winch to the back of it and pulled it out with the biener, man this thing is beast. Waiting for the new mounting plate so I can hook my dump trailer to it. That will make jobs easier as I wont have to hall my blower/vac anymore. I yeah I forgot about that, also comes with a optional blower/vac combo. I will get it mounted up and get more pics. One last thing, it has so much power that I have been taking it to the drag races. 10.24 in the 1/4 with a .0000009 light. WASUUUUUP
Its wet because I just picked it up from the detail shop. As you can see, it has its own porty attachment point and a 1 point hitch, comes with a heavy duty attachment lanyard. The last pic is of the optional clean up tool, makes short work of the 1/2 mile yards, up hill, both ways. Videos coming soon of how I use this absolutely, perfect piece of equipment. I have ordered a saw head from a feller buncher to mount on the front. Then I will be able to remove DANGEROUS trees with it. My skid loader was stuck yesterday, high centered in waist deep slop, no problem, just hooked up the winch to the back of it and pulled it out with the biener, man this thing is beast. Waiting for the new mounting plate so I can hook my dump trailer to it. That will make jobs easier as I wont have to hall my blower/vac anymore. I yeah I forgot about that, also comes with a optional blower/vac combo. I will get it mounted up and get more pics. One last thing, it has so much power that I have been taking it to the drag races. 10.24 in the 1/4 with a .0000009 light. WASUUUUUP
Man that is one sweet machine! Your groundies will be nervous when they see that roll on the job. You and Aerial Mason are showing me the future of our industry. The rake attachment looks like it will save you hours on clean up. I am jealous.:msp_angry:
Enter your email address to join: