Time for a little Christmas Giving

[wigglesworth]

Got this Lombard S150. Dont mind the top handle off, I got it and all the screws. The carb is apart, and needs a kit, but I never got one. It has the piston ported AH-47 motor with good spark and great comp. Its the only piston ported AH motor ive seen, as most have reed valves. I actually had it running, and pulled the carb apart to clean it, and the diaphram fell apart. Free, for cost of shipping.

 

[wigglesworth]

It appears as if someone beat you to the bar, filter, and rim drive setup (by 2 minutes fyi). But you have officially won the oiler gear!

Hey, thats how it goes. No worries, i can pick up a gear local.

 

[tbone75]

Didn't know about this last year or I would have saved some of the stuff I already gave away! LOL Not to many want Poulan wildthing old style and new type parts but I have some stripped crank cases a top cover or two,cranks,mufflers,oil pumps,coils,etc. Got to do some searching may have some other things to add? EDIT: 2 -14" mini-mac bars and a fuel/oil tank for a mini-mac 110 I think? MORE STUFF! Handles for Poulan pro and regular Poulans ,Complete handle for Poulan 2400. Sorry but no clutch covers but I do have some clutches for them and a couple used sprockets May have one carb for each style.Starters for both styles too!And I am still digging LOL Come on guys you need a crank case or two ! LOL

 

[Arrowhead]

I have some Stihl 015 stuff. The jug is perfect. It's for the older "white" 015's. It will not work on the orange 015's. The white ones had 19mm bearings, the orange ones had 19 on one side and 21 on the other. Everything else will interchange. The stuff in the bags are used but good bearings, bar plate, rod bearings, etc.

 

[Arrowhead]

I'll dig up more stuff in the next day or two.

 

[Whiteman]

free exhaust screen!!!!!!!



for reference. stock is 30 x 30 per square inch. stuff up for grabs is 20 x 20. flows better.

youll get 3 x 4 piece enough to do a few mm.

I have been looking for some. I need to go see what I have laying around.

 

[Roanoker494]

I have a inner bucking spike for a Husqvarna 288 to the first "caller". It is bent a bit but can be straightened back out easy, I probably used it as a pry bar at some point.

More to come as soon as I dig my parts boxes out.

 

[o8f150]

ok,,,heres my donations,,,well at least what is left,,,if you guys would pm me on the parts,, it will be easier for me,, that way i won't miss any one,, thanks


spark screens out of poulans

plastic for newer homelites and muffler

newer homelite bodies and plastic

worm gear etc off of a 025 stihl

 

[Outlaw5.0]

Looking for a MS460/046 muffler heat sheild.

 

[Metals406]

Looking for a MS460/046 muffler heat sheild.

Rule breaker!!!!

No begging allowed here, just giving.

 

[Wicked500R]

What a great thread.. I am swapping out some parts on my 372 so I will post them up here in a day or so!

 

[Arrowhead]

Looking for a MS460/046 muffler heat sheild.

Don't ask for parts here, that's what the Swap Meet thread is for.

 

[bluesportster02]

[

i could use a little bit of the fuel line

 

[Chris J.]

If that offends someone, they can take a ##### and stick a ###### in their ###### and swing around a ##### till their ##### pops off!

The above-quoted post deeply offends me ! I was going to give away my five NIB/NOS Stihl 090AVs, but I'm so offended I'm now going to keep them, so there :evilgrin:!!


Now on a serious note:

Free for the cost of shipping! I mention this first because these sprockets got me nailed with a non-sponsor selling infraction*. As some of you might recall, I have a large tub full of spur sprockets, some with bearings, some without. They are NOS, but most will require some light cleaning (a little oil & some fine grit sandpaper).

I can post the list, but I first need to pull the sprockets that'll fit my saws, as I've acquired a few 'new' saws :msp_ohmy: since I last revised the sprocket list. Or you can tell me what you're needing, & I'll check for you. These are spur sprockets.





* I was going to post a venomous explanation, but changed my mind. Merry Christmas, or Happy Holidays, whichever you prefer!

 

[o8f150]

ok,,,heres my donations,,, the only thing i am going to ask to help on the shipping is the 240 and that will only be 10.00,,,if you guys would pm me on the parts,, it will be easier for me,, that way i won't miss any one,, thanks


spark screens out of poulans

plastic for newer homelites and muffler

newer homelite bodies and plastic

worm gear etc off of a 025 stihl

ok guys,,, the av's,,, 240 and the fuel line is spoken for

 

[Brian VT]

Boyz, do we really need to quote 7 pictures to reply ? Not trying to be a Scrooge...just sayin'.

 

[super3]

Boyz, do we really need to quote 7 pictures to reply ? Not trying to be a Scrooge...just sayin'.

I agree.

 

[blsnelling]

Quoting the pictures just makes the thread hard to follow. Go back and edit your first post as to what's claimed, as long as it hasn't been 24 hours.

 

[bluesportster02]

Sorry

 

[RiverRat2]

Boyz, do we really need to quote 7 pictures to reply ? Not trying to be a Scrooge...just sayin'.

OK for those who dont know,,, when quoting someone that has a post with PIX imbedded,,

Please delete the link that has the Pic/Pics out of the quote before you submit your post,,, it only takes a few more seconds


Oh and if you see you forgot to remove his pics,,, Please use the edit function and remove them so we all dont have to look @ the SAME OLD PICS AGAIN!!!!!!

OH and By the way,,, are there any tree climbers out there???? here is my Christmas gift!!!!!


Bailey's - Nylon Leg Strap

A brand new set of two,,, I fired the climber I bought them for before He ever got to use them... Its a really long story!!!!!!!

First come,,, first serve!!!!! they stihl have all the tags on them,,,,

Merry CHRISTmas!!!!!! Ever body!!!!!!

Metals406 has spoken for em so he's getting them for postage!!!!