Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Dang Jeremy!!!

That MS 260 PRO looks almost brand new!
I might have to try to pick that one up myself if I didn't hate the scurvy little Ba#####s so bad.


Mike
 
Anybody need an adjustable oil pump kit for the 026/260? It was installed in my personal saw and run for maybe 10 or so tanks, and I sold the saw, and put the plain Jane oiler back on.

c76fd673.jpg


Also got this fixin to head to the bay. Open for ?? Or $$$...

d35681ad.jpg


bb7de711.jpg


9c4640b2.jpg

pm sent
 
Anybody need an adjustable oil pump kit for the 026/260? It was installed in my personal saw and run for maybe 10 or so tanks, and I sold the saw, and put the plain Jane oiler back on.

Let me know how much for the oiler kit. If you're interested I have Oregon non safety.325 .050 chain I can take off a roll for trade. Also have 8 tooth .325 small spline sprocket rims; this and that mostly for Stihl.

Anybody have extra 3/8 low pro connector links. I have a roll that came without any. Sabre chain if I remember right, think its the same as Oregon. Could use up to a dozen or more, could trade for a length of chain ,green stuff or ?
 
Hey guys,

Looking for the following Jonsered parts:

2159: Fuel tank/rear handle
625, 630, 670: crankcase for the 2-piece ignition (halves or complete)
2063/2163: crankcase (halves or complete)

I have some random Jred parts, Husky 357/359 fuel tank and handle, and a Solo 60135 for trade.

Send me a PM with what you have.
 
I don't see why not. Might be able to find an electronic ignition for an 020 easier than a 031/032.

I think it would work for an 032 but not an 031. IIRC the 031 has different polarity on the flywheel than an 032. That's why many people hook up a Nova module to one and it doesn't run right until you switch the polarity of the module.
 
I think it would work for an 032 but not an 031. IIRC the 031 has different polarity on the flywheel than an 032. That's why many people hook up a Nova module to one and it doesn't run right until you switch the polarity of the module.

I don't know what it all fits or if anyone is interested, but I have a Stihl electronic conversion kit new in the package.
 
Lookin for Mac 24" bar (10-10 series)

Hey guys,

I got my Husqvarna bar. I still have the new Oregon Pro Lite bar, D025/Stihl mount, 66DL, .063, 18" willing to trade or $ for 24" mac bar, lemme know.
Also have a loop of chain for it - carlton full chisel
Cheers
 
Last edited:
Anybody have extra 3/8 low pro connector links. I have a roll that came without any. Sabre chain if I remember right, think its the same as Oregon. Could use up to a dozen or more, could trade for a length of chain ,green stuff or ?

Gotcha, let me know how many!
I owe you from a 051 cylinder I used on a mock up.


Hey guys,

I got my Husqvarna bar. I still have the new Oregon Pro Lite bar, D025/Stihl mount, 66DL, .063, 18" willing to trade or $ for 24" mac bar, lemme know.
Also have a loop of chain for it - carlton full chisel
Cheers

Can any one give me a link to that style bar?
Believe I can help! FREE
I Owe WYK for helping fellow UK member jmtherose out.


PM me the specifics and addresses, will try to get them out here soon.
 
I am in need of a muffler body for my Homelite XL924. I'm pretty sure a muffler for a XL925 would work as well. Any help appreciated. I can trade $$$
 
Anyone have a 44.7mm MS-260 jug for grabs? Un-scored would be ideal, but I'm always willing to take my chances....
 
I think it would work for an 032 but not an 031. IIRC the 031 has different polarity on the flywheel than an 032. That's why many people hook up a Nova module to one and it doesn't run right until you switch the polarity of the module.

I'm talking strictly a condenser swap for an aftermarket one.

You can put a Nova on a 031, but you need to play with the timing.
 
Gotcha, let me know how many!
I owe you from a 051 cylinder I used on a mock up.




Can any one give me a link to that style bar?
Believe I can help! FREE
I Owe WYK for helping fellow UK member jmtherose out.


PM me the specifics and addresses, will try to get them out here soon.



And I owe you a couple of clutch shoes still. I'm forgetful but I mean well. :(



I'm looking for a Husky 394/395 clutch cover in good condition. I though about the AM ones that are all over eBay, but this saw is shaping up very well......I would rather have a OEM one.

I have a #### load of Stihl parts and a few Husky bits to trade. About out of worthless government paper though........
 
Back
Top