o8f150
Tree Freak
ooopppssss sorry,,,,, FREE!!!!!!!,, they are 16"
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I'm a little slow... Will these fit an 026? If so, I'll take one! Thanks!
o8f150
Tree Freak
i believe the 026 is a large mount,,,,, if i am wrong someone please correct me,,, if it is a small mount i will be more then happy to send you one
Guido Salvage
Supreme Saw Whoreder
Is that all you have for the 757? As I recall the saw has 140 PSI but I can check.
cutforfun
Addicted to ArboristSite
looking for a coil for a mcculloch 610, there were other saws with the same coil, 605, timber bear, eager beaver 3.7 . let me know what your looking for. Trying to help out a friend.
Big_Wood
westcoast dweller
ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item,,,,JUST KIDDING MIDGETS,,DONT GET YOUR PANTIES IN A BUNCH,,,,,,shipping is on my dime as long as its to the lower 48 with usps
View attachment 360385 View attachment 360387
i would be down with those rims scott
Yes , the saw went to another member.
o8f150
Tree Freak
PM me your addy keith,,, i can have it heading your way tomorrow
o8f150
Tree Freak
the rims are spoken for and 1 of the stihl mount bars is spoken for,,,,,,,,,,,ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item
View attachment 360385 View attachment 360387
the rims are spoken for and 1 of the stihl mount bars is spoken for
I would certainly put those Mac bars on well-deserving saws if they're still available!
xtremez
ArboristSite Guru
ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item
View attachment 360385 View attachment 360387
Id be interested in one of the stihl mount bars if there's any left.
xtremez
ArboristSite Guru
Hey Scott,ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item
View attachment 360385 View attachment 360387
I'd like to have one of those GB bars. Hadn't heard about you closing yer shop. Hope it was voluntary. I bet all the local elderly are gonna miss you.
Guido Salvage
Supreme Saw Whoreder
Air filter decent?
I would use it.
o8f150
Tree Freak
ok guys,,, everything is spoken for,,,, thanks for the interestok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item
View attachment 360385 View attachment 360387
GMAK
ArboristSite Member
I may have an 064 cylinder, not sure, found it in the shop when I bought the place. I don't much need a MS660 jug though... What #'s should I be looking for on the cylinder?
