i'm not sure if i have problem with clutch or not, on saw is 18" bar with 3/8 chain, sharpened with husky sharpening tool, saw is old 3 months and around 30 cubic meters prepared with it,
when i press saw in wood chain stops and i don't need press too much, also when chain brake is on saw revs like isn't brake engaged but chain isn't moving, clutch and drum are dry all springs are in place
any ideas?
when i press saw in wood chain stops and i don't need press too much, also when chain brake is on saw revs like isn't brake engaged but chain isn't moving, clutch and drum are dry all springs are in place
any ideas?