Deets066
Firewood hack
066 cutting:
Now you just need some wood worthy of that beast! Nice runnin saw
066 cutting:
We had no dramas mounting the 36" ES in .404". Clearance off the rim and bar adjustment was fine. It may just be your photo but are you sure the bar you have is a 12mm 3003 mount bar? It looks like you have a bit of clearance between the bar studs and bar slot. It's not a 14mm 3002 mount bar is it?
You have the wrong bar sir,a regular. 063 3/8 bar is the same as 404.just the bar tip is different and the drive sprocket has to be 404. That bat may be for an ms880 maybe?
I have a customer that runs a 42" on his 661, even before porting.
I have 36" .404 on mine, just a muffler mod ....................I run a 36" on mine and have not had any problems. It has not been ported either.
If you have a 3/8 bar already ,you can just change the tip , the old roller nose bars are cool ,can run 3/8 or 404 on them ,no sprocket in the tip .Thanks guys, it is a 3002 mount, now I have (2) ES 3003 bars for 36" .404 on order ................. $120.00 for BOTH ..........
I thought about that, but @ $60 for a new 36" ES bar, I don't mind having a few .050 in .375 and a few .063 in .404If you have a 3/8 bar already ,you can just change the tip , the old roller nose bars are cool ,can run 3/8 or 404 on them ,no sprocket in the tip .
Please don't. this is fun.You spelled troof wrong, dumbass
Edit: I stopped taking this thread seriously a few pages ago, if y'all are still being cereal, I'll pull it together
He lookethed in the mirror as he typed that.Please don't. this is fun.
Good one ............. my water made it to my screen, right out of my mouth !!!!!He lookethed in the mirror as he typed that.
His avatar is a pic of who he aspires to be.
As his screen name states, he's like Bruce Jenner, he don't know which way to go.
"I have a potty mouth"'ins And Stuffs
All troofHe lookethed in the mirror as he typed that.
His avatar is a pic of who he aspires to be.
As his screen name states, he's like Bruce Jenner, he don't know which way to go.
It's ok little buddy: buckets are a commodity in 1st word countries also.All troof
Repped for confusion!It's ok little buddy: buckets are a commodity in 1st word countries also.
I tried to grind 404 on the silvey , had a hard time getting them done compared to 3/8 ,teeth size makes a difference they must be taller or something ,that 404 would not work on the .050 bar anyways even with a tip change ,i believe it is .063 onlyI thought about that, but @ $60 for a new 36" ES bar, I don't mind having a few .050 in .375 and a few .063 in .404
It will also let me run my 661 against my 066 without any downtime swapping bars & chains in both .404 and .375 - CAD weaves a tangled web !!
They wear out a file faster as wellI tried to grind 404 on the silvey , had a hard time getting them done compared to 3/8 ,teeth size makes a difference they must be taller or something ,
I have a few .063 bars for .375 hanging. Thought about the tip change, but when my dealer told me the price for the new bar, I couldn't say no and ordered themthat 404 would not work on the .050 bar anyways even with a tip change ,i believe it is .063 only
What is the part number?They wear out a file faster as well
I have a few .063 bars for .375 hanging. Thought about the tip change, but when my dealer told me the price for the new bar, I couldn't say no and ordered them
I ordered (3) 36" bars; (2) 3003 000 7353 (.063 in .404) and (1) 3003 000 9653 (.050 in .375)What is the part number?
I read on the internets a stihl will not oil a bar that long ...........I ordered (3) 36" bars; (2) 3003 000 7353 (.063 in .404) and (1) 3003 000 9653 (.050 in .375)
I read on the internets a stihl will not oil a bar that long ...........
Enter your email address to join: