Rate your Chinese chain saw?
- Thread starter Huskybill
- Start date
Help Support Arborist Forum:
They are good beater or loaner saws. Low quality plastics - low quality everything really. But easy to take apart and parts are easily available. And if you damage, lose or get one stolen it's no big deal.
I've bought four over the last year. 52cc, 58cc and, allegedly, 62cc. Three were used ones in good condition for less than £20 / $28 each and one was brand new, missing oil and fuel caps, for £27 / $38.
It does pain me to support Chinese industry though.
I've bought four over the last year. 52cc, 58cc and, allegedly, 62cc. Three were used ones in good condition for less than £20 / $28 each and one was brand new, missing oil and fuel caps, for £27 / $38.
It does pain me to support Chinese industry though.
Allergic to.
I have few made in China chainsaws all Makita branded 3 battery electric and one 3601frdb. I think there are plenty of reviews of these things without typing out new stuff. I seem able to get parts point and click.
Bill you have on multiple occasions put threads to made in China chainsaws with pictures and places to purchase. How many have you actually bought? Same question for the rolls of chain.
Bill you have on multiple occasions put threads to made in China chainsaws with pictures and places to purchase. How many have you actually bought? Same question for the rolls of chain.
My rating is ZERO. I wouldn't accept one of these even as a gift.
heh, mine were gifts, a 4645 and 2 x 9999,s
they dont get used much tho
if i had a stihl it would probably have been stolen by now
they dont get used much tho
if i had a stihl it would probably have been stolen by now
Hell, most of their parts are bad enough, why would I buy one made of them? They have the technology but if they keep selling low quality why bother using it. Guess my answer is no wouldn't buy one or support the people who make them.... Old School thinking.
awful knawful
ArboristSite Operative
John cutter top handle has been flawless. Probably 20 tanks through it. I'm quite impressed, even though it tried to kill me.
Love my g388. Want the g466.
I have been watching these saws for the last few years on Ebay and have often wondered about them.A 62 cc saw for $129 is tempting.Just out of curiosity though,how much better is a Holzforma clone saw versus a $129 Coocheer or some similiar off brand .I doubt I ever buy either,because that $129 would buy me enough fuel mix and a couple chains to run my good saws for a year.
Franny/ Guys, I’d like to invest into one more saw, I’m on the fence which one to get wether it’s chinese or older Swedish/American made. I’m looking for ideas.
RED-85-Z51
Addicted to ArboristSite
G660 has been good, G372xp has been good, Remington Zenoah clone with a 46 to 58cc big bore is pretty solid. For what they cost, i can't complain.
Sent from my SM-G996U using Tapatalk
Sent from my SM-G996U using Tapatalk
Have two chinesium saws, a 440 knockoff and a 200t. The 440 quickly became the main felling/bucking saw and the 200t is the new main tool for pruning the orchard.
Bought them as kits and had a lot of fun putting them together. Wouldn't recommend buying them in kit form if you're not familiar with small engines though since there's no manual or instructions, so the box of screws and parts can be a little daunting to sort out if you don't know what you're doing.
Anyhoo - both saws work great and tbh can't tell them apart from the Stihl counterparts.
Bought them as kits and had a lot of fun putting them together. Wouldn't recommend buying them in kit form if you're not familiar with small engines though since there's no manual or instructions, so the box of screws and parts can be a little daunting to sort out if you don't know what you're doing.
Anyhoo - both saws work great and tbh can't tell them apart from the Stihl counterparts.
Canyon Angler
Addicted to ArboristSite
I have a largely Chinese clone of a 660 with a lot of the important parts (crank, piston, rings, brake parts, clutch, etc.) replaced by the builder with OEM (or equivalent non-Chinese) parts. Runs like a raped ape. For as little as I use a 660, it works great for me, knock wood, for about 1/3 of the price of OEM.
I bought a kit to assemble a 361 clone (also have an original Stihl 361), but haven't gotten around to putting it together yet.
I bought a kit to assemble a 361 clone (also have an original Stihl 361), but haven't gotten around to putting it together yet.
Does that saw have a chain brake, or just the "handguard" thingie?
GoBigRed
ArboristSite Operative
In my opinion, you can’t go wrong with an old yellow saw. I’m kinda fond of the Mac 10 series saws from 54cc up to 70cc. Lots of parts, power, and solid construction.
awful knawful
ArboristSite Operative
Chain brake
awful knawful
ArboristSite Operative
You're so pure and great. Go preach somewhere else.What a topic to even think about let alone consider buying a china saw.
Folks knowing they are buying ripped off and cloned saws are the ones that would sell out friends and family.
