leetabix
ArboristSite Lurker
Hi guys! To cut a long story short, I am rebuilding a late model 660, onto an old 066 crankcase (Broken casing) At the time, and according to the stilhl parts diagram, I was thinking straight swap, easy! However, the poly flywheel won't fit on the older style 066 crank, as I'm sure some of you could probably have told me! Anyway, I went ahead and used the aluminium wheel that came with the 066, part number 1122 400 1209, coupled with the newer coil on the 660, I now don't have a spark. Even if the coil/flywheel combination was not correct, surely I should still have a spark? Is there a chance the flywheel is knackered somehow? I didn't take any of the wiring apart in the handle as I didn't have to, so I figure that should still be fine. I have read that the flywheel may/may not be compatible with later coils, so my question, assuming there is nothing wrong with the ali flywheel, and the switching/wiring is fine, and I DO have a coil compatibility issue, is there a coil that will work with the old ali flywheel I have, (it has only one key position) 1122 400 1209, and swap directly for the coil I have. Any help would be much appreciated! Dave