brncreeper
Addicted to ArboristSite
Be very careful tuning .. a lot of the 088 have limited coils also... I have one... about the same age as yours.
Quote by Lakeside53:The manual assumes the CARB limiters are in place. The coil will limit about 12,250.. but... it's not a clean transition.
The WOT is set to 11,500 via the carb to avoid the ignition limiter. Remember.. . this is just a SWAG for any given bar length... etc. It will leave the saw slightly rich, but that's just fine for most uses. And 500 rpm is meaningless in real terms.
Don't mess with the H screw unless you really understand how the limiter works....