Madsaw
Addicted to ArboristSite
OK I am working on a 114 Dolmar with spark issues. The guy wanted the coild changed out. A local shop already had the flywheel pulled adn everything loose under it. So, what is the correct setting to place the electronic module at under the fly wheel. I have already put it back together and had a spark but it only lasted a little bit. The coil I used is knowen to be good. It came off a running saw with low compression. I am thinking I do not have somethign set correctly for this saw. Also is there a source for new solid states for it. The parts saw I have was a 112 points saw.
Thanks
Bob
Thanks
Bob