12-14" bar for 5100

[lqqk]

Where can I find a .375 x .050 x 12-14" bar for a dolmar 5100. I have found pics of a Carlton, but cant find one at some of the online sites. Any help would be appreciated.

Thanks
LQQK

 

[Swamp Yankee]

Same as small mount Husky

Should have no problem finding a small mount Husky bar (for 346XP,350, 357XP, 353 etc) in that length range. Check Bailey's, one of the site sponsors. They usually have an excellent selection.

As for chain suggest going to a Stihl dealer for Stihl RSC or Bailey's for Woodland Pro.

Take Care

 

[Taxmantoo]

Will the small mount Husky bars like these work?

http://www.baileysonline.com/search.asp?skw=EJ50%2BEP50%2BEP43+12
http://www.baileysonline.com/search.asp?skw=EJ50%2BEP50%2BEP43+14

 

[SawTroll]

Where can I find a .375 x .050 x 12-14" bar for a dolmar 5100. I have found pics of a Carlton, but cant find one at some of the online sites. Any help would be appreciated.

Thanks
LQQK

Small Husky bars in 13" and 3/8" pitch are not common, but Freakingstang once posted a pic of one - believe it was Carlton......

13" in .325 is standard on most 39 to 53cc Huskys here though.....

 

[Swamp Yankee]

Good news and bad news,

Good news,
Found some small mount 3/8 pitch, 13 inch Carltons in Bailey's closeout bars for a great price.

Bad news
They're .058 gauge not .050, but if you're buying new chains that shouldn't matter a bit.

http://www.baileysonline.com/itemdetail.asp?item=CPC+13+SJ58&catID=705

Take Care

 

[lqqk]

Yes, I found the bars on Baileys that are .058 but I kind of wanted to stick with .050-that is what the rest of my saws are. I bought a 25' roll of .050 3/8 RSC to make a couple chains for all the saws and if I cant find the short bar in .050 I will probably stick with what I have. Thanks to all that looked for me.

 

[lqqk]

what is .365 chain?

http://www.baileysonline.com/itemdetail.asp?item=CFC+12+EP50&catID=



Is .365 considered low profile or is it just an oddball size.

On another note, is .050 3/8 RSC an oddball size, the stihl dealer I use didnt want to order me individual chains but would get me a 25' roll. That is why I was looking for the short bar for the 5100 to make the most of the roll of chain and I would grab one of the other saws anyway if I have much cutting to do over 12" anyway.

Thanks
LQQK

 

[nikocker]

Try this one.

Oregon site lists 14" Bar and chain combo: #105699 that use 91VG chain that is 3/8 .50 gauge. I'm not sure combo fits which saws but at least the pitch and gauge are right.??

OK - - - checked further and the 105699 combo says it's for Husky models 23, 36, 41, 34, 35, 37 and 335. The Oregon bar is #140GPEA041. I would think this bar would work!

Al

 

[blsnelling]

http://www.baileysonline.com/itemdetail.asp?item=CFC+12+EP50&catID=



Is .365 considered low profile or is it just an oddball size.

On another note, is .050 3/8 RSC an oddball size, the stihl dealer I use didnt want to order me individual chains but would get me a 25' roll. That is why I was looking for the short bar for the 5100 to make the most of the roll of chain and I would grab one of the other saws anyway if I have much cutting to do over 12" anyway.

Thanks
LQQK

.365 is 3/8 lowpro. .050 3/8 RSC is about all that's sold around here in chisel chain.

 

[Taxmantoo]

.365 is 3/8 lowpro. .050 3/8 RSC is about all that's sold around here in chisel chain.

But what, if anything, is the difference between a 3/8 .050 lopro bar and a 3/8 .050 bar? Is the lopro bar thinner?

 

[aandabooks]

But what, if anything, is the difference between a 3/8 .050 lopro bar and a 3/8 .050 bar? Is the lopro bar thinner?

The tip is smaller. You can't run full size 3/8 on a lo-pro bar.