2016 Christmas giveaway

[Philbert]

Not sure if this is complete - I made a few corrections that I noticed:

1.) Mac 1-40 - @jerrycmorrow
2.) 2x 325 .058 carlton chains of any length - @nstueve
3.) 2x 325 .058 34LG oregon chains of any length - @atpchas
4.) 211 stihl parts - @brandonstc6
5.) Poulan Pro 295 (good compression) - @bowtechmadman
6.) 2x 3/8LP .043 GB R43S chains of any length - @atpchas
7.) 5x 3/8 .050 full chisel oregon chain, 72 or 84dl you pick, used/like new--- @astnmacgto
8.) XL 12 parts,lots @Yukon Stihl
9) A064 14" for 1/4" pitch chain OR New Oregon replacement sprocket nose for .325 chain @svk
10) Large flat rate of chains @ValleyFirewood
11) Poulan Fuel Line Kit (2) @dougand312) OEM H-142 top cover (mainewoods)
13) Poulan p3416 whole saw "unknown" operating condition @LonestartStihl
14) 621 piston - @MnSam
15. 346 xp top cover @stihlaficionado
16. Pipe tobacco (see Post #118) @n240sxguy
17. Chain Rehab offer (see Post #104) @Philbert

 

[astnmacgto]

Your knives are top notch. Being a quality hand made piece like that means a lot. I'm not telling you what you should/shouldn't do but I think if you offer a knife up to the forum this year you should consider doing a raffle ($5 tickets) and donate the money (how you see fit) to a local charity of your choice. That would really 'pay it forward'. From the generosity I've seen on this forum and the quality of your knives I know it could help someone this time of year.

Merry Christmas everyone.

I would buy a few 5 dollar raffle tickets for a handmade USA knife, especially for charity

 

[clemsonfor]

Guess I will dig around aND look up that 335 cover to see of it fits

 

[djones]

Not sure if this is complete - I made a few corrections that I noticed:

1.) Mac 1-40 - @jerrycmorrow
2.) 2x 325 .058 carlton chains of any length - @nstueve
3.) 2x 325 .058 34LG oregon chains of any length - @atpchas
4.) 211 stihl parts - @brandonstc6
5.) Poulan Pro 295 (good compression) - @bowtechmadman
6.) 2x 3/8LP .043 GB R43S chains of any length - @atpchas
7.) 5x 3/8 .050 full chisel oregon chain, 72 or 84dl you pick, used/like new--- @astnmacgto
8.) XL 12 parts,lots @Yukon Stihl
9) A064 14" for 1/4" pitch chain OR New Oregon replacement sprocket nose for .325 chain @svk
10) Large flat rate of chains @ValleyFirewood
11) Poulan Fuel Line Kit (2) @dougand312) OEM H-142 top cover (mainewoods)
13) Poulan p3416 whole saw "unknown" operating condition @LonestartStihl
14) 621 piston - @MnSam
15. 346 xp top cover @stihlaficionado
16. Pipe tobacco (see Post #118) @n240sxguy
17. Chain Rehab offer (see Post #104) @Philbert

18 2 homelite bars 1 14" & 1 16" djones

 

[Philbert]

Not sure if this is 'complete' - I made a few corrections that I noticed:

1.) Mac 1-40 - @jerrycmorrow
2.) 2x 325 .058 carlton chains of any length - @nstueve
3.) 2x 325 .058 34LG oregon chains of any length - @atpchas
4.) 211 stihl parts - @brandonstc6
5.) Poulan Pro 295 (good compression) - @bowtechmadman
6.) 2x 3/8LP .043 GB R43S chains of any length - @atpchas
7.) 5x 3/8 .050 full chisel oregon chain, 72 or 84dl you pick, used/like new - @astnmacgto
8.) XL 12 parts,lots @Yukon Stihl
9.) A064 14" for 1/4" pitch chain OR New Oregon replacement sprocket nose for .325 chain @svk
10.) Large flat rate of chains @ValleyFirewood
11.) Poulan Fuel Line Kit (2) @dougand312) OEM H-142 top cover @mainewoods
13.) Poulan p3416 whole saw "unknown" operating condition @LonestarStihl
14.) 621 piston - @MnSam
15.) 346 xp top cover @stihlaficionado
16.) Pipe tobacco (see Post #118) @n240sxguy
17.) Chain Rehab offer (see Post #104) @Philbert
18.) 2 homelite bars 1 14" & 1 16" @djones

 

[leecopland]

Are you taking them off once they are claimed?

 

[brandonstc6]

Update on the ms 211 parts I'm giving away, I have two cranks, two flywheels, two clutches, two intake boots, one sprocket and one oiler gear.


Sent from my iPhone using Tapatalk

 

[clemsonfor]

Not sure if this is 'complete' - I made a few corrections that I noticed:

1.) Mac 1-40 - @jerrycmorrow
2.) 2x 325 .058 carlton chains of any length - @nstueve
3.) 2x 325 .058 34LG oregon chains of any length - @atpchas
4.) 211 stihl parts - @brandonstc6
5.) Poulan Pro 295 (good compression) - @bowtechmadman
6.) 2x 3/8LP .043 GB R43S chains of any length - @atpchas
7.) 5x 3/8 .050 full chisel oregon chain, 72 or 84dl you pick, used/like new - @astnmacgto
8.) XL 12 parts,lots @Yukon Stihl
9.) A064 14" for 1/4" pitch chain OR New Oregon replacement sprocket nose for .325 chain @svk
10.) Large flat rate of chains @ValleyFirewood
11.) Poulan Fuel Line Kit (2) @dougand312) OEM H-142 top cover @mainewoods
13.) Poulan p3416 whole saw "unknown" operating condition @LonestarStihl
14.) 621 piston - @MnSam
15.) 346 xp top cover @stihlaficionado
16.) Pipe tobacco (see Post #118) @n240sxguy
17.) Chain Rehab offer (see Post #104) @Philbert
18.) 2 homelite bars 1 14" & 1 16" @djones

@

 

[mortalitool]

I'll throw in this recoil. For an 024/026 stihl. In good working order. I'll pay shipping. Merry Christmas.

Sent from my VS980 4G using Tapatalk

 

[Matt_Ellerbee]

Not sure if this is 'complete' - I made a few corrections that I noticed:

1.) Mac 1-40 - @jerrycmorrow
2.) 2x 325 .058 carlton chains of any length - @nstueve
3.) 2x 325 .058 34LG oregon chains of any length - @atpchas
4.) 211 stihl parts - @brandonstc6
5.) Poulan Pro 295 (good compression) - @bowtechmadman
6.) 2x 3/8LP .043 GB R43S chains of any length - @atpchas
7.) 5x 3/8 .050 full chisel oregon chain, 72 or 84dl you pick, used/like new - @astnmacgto
8.) XL 12 parts,lots @Yukon Stihl
9.) A064 14" for 1/4" pitch chain OR New Oregon replacement sprocket nose for .325 chain @svk
10.) Large flat rate of chains @ValleyFirewood
11.) Poulan Fuel Line Kit (2) @dougand312) OEM H-142 top cover @mainewoods
13.) Poulan p3416 whole saw "unknown" operating condition @LonestarStihl
14.) 621 piston - @MnSam
15.) 346 xp top cover @stihlaficionado
16.) Pipe tobacco (see Post #118) @n240sxguy
17.) Chain Rehab offer (see Post #104) @Philbert
18.) 2 homelite bars 1 14" & 1 16" @djones

Haven't dug in shop yet,but here is some stuff. 7" AR quad rail with barrel nut and a set of vortex scope rings.

 

[Philbert]

Are you taking them off once they are claimed?

'I' am not keeping it up - not sure that it is needed on a thread like this, versus a raffle thread.

I just noted a few obvious errors in a list someone else posted that I wanted to correct.

Philbert

 

[clemsonfor]

Not sure if this is 'complete' - I made a few corrections that I noticed:

1.) Mac 1-40 - @jerrycmorrow
2.) 2x 325 .058 carlton chains of any length - @nstueve
3.) 2x 325 .058 34LG oregon chains of any length - @atpchas
4.) 211 stihl parts - @brandonstc6
5.) Poulan Pro 295 (good compression) - @bowtechmadman
6.) 2x 3/8LP .043 GB R43S chains of any length - @atpchas
7.) 5x 3/8 .050 full chisel oregon chain, 72 or 84dl you pick, used/like new - @astnmacgto
8.) XL 12 parts,lots @Yukon Stihl
9.) A064 14" for 1/4" pitch chain OR New Oregon replacement sprocket nose for .325 chain @svk
10.) Large flat rate of chains @ValleyFirewood
11.) Poulan Fuel Line Kit (2) @dougand312) OEM H-142 top cover @mainewoods
13.) Poulan p3416 whole saw "unknown" operating condition @LonestarStihl
14.) 621 piston - @MnSam
15.) 346 xp top cover @stihlaficionado
16.) Pipe tobacco (see Post #118) @n240sxguy
17.) Chain Rehab offer (see Post #104) @Philbert
18.) 2 homelite bars 1 14" & 1 16" @djones

Clutch cover for 345 that @ld7 dmax posted

 

[mkinslow]

Thank you sir for your compliment I've been thinking about some things on the knife deal but not sure what to do yet. Not an excuse but I've been working so many hours a week at my regular job and saws on the side it's hard to come up with a good solution. But I'm working on finding out what to do. But I want to do something either way

 

[astnmacgto]

Haven't dug in shop yet,but here is some stuff. 7" AR quad rail with barrel nut and a set of vortex scope rings.

That's a nice gift, just curious what brand is the quad, I have a low budget at3 tactical and it rocks

 

[leecopland]

OK if we are going off saws, I have a .243 Win bullet seating die that I'll never use. Yours for postage, from Canada. Pic later

 

[Matt_Ellerbee]

That's a nice gift, just curious what brand is the quad, I have a low budget at3 tactical and it rocks

I'm thinking it's a radical firearms. Came on a pistol upper I bought from them years ago.

 

[brandonstc6]

Does anyone want a homelite super xl. It seems to have good compression. You pay the ride and it's yours


Sent from my iPhone using Tapatalk

 

[svk]

Does anyone want a homelite super xl. It seems to have good compression. You pay the ride and it's yours


Sent from my iPhone using Tapatalk

Sure!

 

[Philbert]

OK, things have been a bit slow here . . .

Philbert's Home Made Happy Saw Gift Set*



Includes:
- tethered 13mm / 19mm, hi-viz scrench (specially tapered to fit those narrow Swedish chain tensioners);
- tethered, genuine STIHL carb adjusting screwdriver & toothpick;
- field cleaning kit with toothbrush, dusting brush, and re-pourposed bar groove&hole cleaner;
- Oregon #556418 chain pitch and gauge measuring tool with personalized instructions.

*includes some recycled content (for you environmental types). Colors may vary.

Recipient pays the shipping. Please send me a PM.

Happy Holidays!

Philbert

 

[Armbru84]

I have 2 Oregon 20" 3/8 .063 chains I will send. I think they are semi chisel. Taker to pay the shipping.