2101xp/ top all time muscle saws!!!!!!!!!!!

[Joe46]

Always enjoy your enthusiasm Norm:msp_thumbup:

 

[shaker223]

Do you have a copy of the 2100 Workshop Manual.It has lots of info regarding the oiler.

I don't. I'll have to find one.

 

[Ductape]

Do you have a copy of the 2100 Workshop Manual.It has lots of info regarding the oiler.

Is it possible to download off the net ?

 

[greg176]

PM me with your email and I will send to you. Have sent manuals to shaker.I have been able to get manuals on web for all my saws but had to navigate through the dark side to find them.

 

[NORMZILLA44]

Thanks Joe Shaker I hope you get it, I know a couple guys local here that used to work on, and fall with them. I will ask tommorow if they have any ideas.

 

[ausneil 1]

A 2100 worshop manual would be super, i have not seen one since the 80's.

 

[greg176]

Here is a link to the 2100 Workshop Manual,

http://weborder.husqvarna.com/order_static/doc/HWEN/HWEN1990/HWEN1990_1018801-26.pdf

 

[ausneil 1]

Here is a link to the 2100 Workshop Manual,

http://weborder.husqvarna.com/order_static/doc/HWEN/HWEN1990/HWEN1990_1018801-26.pdf

Thanks mate, thats tops.
later neil

 

[shaker223]

Thanks, got the manuals. Now, I'm going to be out of town for a week. Won't get a chance to look at it until then.:msp_unsure:

 

[NORMZILLA44]

I hate that shaker, because if it was me I would be thinking about it the whole time I was, out of town. That stuff drives me nuts!

 

[greg176]

Ran the 2101 today for the first time in a few months. Used it with the Alaskan mill to cut up an old cedar log into lumber for some storm windows I am making.saw ran like a champ.View attachment 205272

 

[NORMZILLA44]

Greg I love mine, incase you dindn't know. Built to perform, and last, and RUN!

 

[ausneil 1]

Ran the 2101 today for the first time in a few months. Used it with the Alaskan mill to cut up an old cedar log into lumber for some storm windows I am making.saw ran like a champ.View attachment 205272

Greg,,, I looked at the 2011 and 2101 manuals you emailed me. They are very detailed and once again thanks mate.

 

[NORMZILLA44]

Shaker, I talked to my friend Chuck the saw shop owner. He used to specialize on the 2100-01s. Knows alot, he thinks something may be getting overlooked on the drive gear, near the clutch. Somewhere in that area, never had one apart myself.

 

[dave k]

Just for you Norm a group photo !

 

[NORMZILLA44]

Wow! Dave dont know what to say I am speechless! Love the collection great saw's

 

[ausneil 1]

Here is a link to the 2100 Workshop Manual,

http://weborder.husqvarna.com/order_static/doc/HWEN/HWEN1990/HWEN1990_1018801-26.pdf

Greg, would you by chance be able to get the 051 and 076 manuals or give me some direction to where to look.
Thank you kindly, neil

 

[Ductape]

Any 380CD parts interchange with the 2100? Clutch cover with brake looks like it might fit? Much else, if anything, interchange?

 

[Jon1212]

Greg, would you by chance be able to get the 051 and 076 manuals or give me some direction to where to look.
Thank you kindly, neil

Neil,
I have PM'd you the IPL's and Service Manuals for both saws. In the future if you need any other manuals, you can post it in the 'Beg for Manuals' thread.
Jonathan

 

[NORMZILLA44]

Duct tape, I dont know for sure but I wouldnt think so. The 2101 is a pretty big powerhead, but never know maybe part will work. Never heard of a 380. 480 I have you have a picture?