JONSSTIHL
ArboristSite Operative
Here is a pic of my non cat muffler mod. Similar to brad's only mine is tig welded. I didn't want to deal with screws backing out and I had no screen for it.
I know there should be a screen on there but the reason I decided to do the mod was because I snapped the screw holding the screen on the original port and drilling and tapping it didn't go so well. so I ended up with a stock muffler with no screen so I figured why not.
this is after two coats of flat black high temp paint.
tuning will happen tomorrow when the weather warms up a little and the paint dries.
I know there should be a screen on there but the reason I decided to do the mod was because I snapped the screw holding the screen on the original port and drilling and tapping it didn't go so well. so I ended up with a stock muffler with no screen so I figured why not.
this is after two coats of flat black high temp paint.
tuning will happen tomorrow when the weather warms up a little and the paint dries.