S skinnykenny New Member Joined Sep 18, 2008 Messages 3 Reaction score 0 Location Boaz, Kentucky Sep 18, 2008 #1 can someone tell me how to set the high &low on a 306A? is there a initial setting too start with before its running? Any info would be great!
can someone tell me how to set the high &low on a 306A? is there a initial setting too start with before its running? Any info would be great!
Scooterbum Addicted to ArboristSite Joined Oct 30, 2006 Messages 4,877 Reaction score 1,050 Location Virginia Sep 18, 2008 #2 Here's a good link http://web.archive.org/web/20051018212959/www.madsens1.com/sawtune.htm I generally start about 1.5 turns out from each.Remember not too tight when you seat the needles.They damage real easy.
Here's a good link http://web.archive.org/web/20051018212959/www.madsens1.com/sawtune.htm I generally start about 1.5 turns out from each.Remember not too tight when you seat the needles.They damage real easy.
S skinnykenny New Member Joined Sep 18, 2008 Messages 3 Reaction score 0 Location Boaz, Kentucky Sep 18, 2008 #3 thank you! Time to try it out!
Scooterbum Addicted to ArboristSite Joined Oct 30, 2006 Messages 4,877 Reaction score 1,050 Location Virginia Sep 18, 2008 #4 Good saw.I have a couple. Get some hearing protection !!
MS460WOODCHUCK Addicted to ArboristSite Joined Jun 30, 2008 Messages 5,015 Reaction score 1,424 Location Ohio Sep 18, 2008 #5 I start with 1 turn out and the book says no less than 7/8 out when u set it. Any less will be 2 lean. Glad to see some guys still running some dang good ol saws!!!
I start with 1 turn out and the book says no less than 7/8 out when u set it. Any less will be 2 lean. Glad to see some guys still running some dang good ol saws!!!