Building a 346 and was wondering about the larger seal that come with the bearing kit. Pulled clutch off of my other 346 and all I see was the bearing but no seal . Any help appreciated.
Built onto the bearing?The seal is there between the inner and outer race
everytime I order bearings and seals they send me a sealed bearing and one that is not and two seals. One seal for flywheel and the other that evidently goes no where. Thanks for your help.The larger seal is the one in the bearing. It looks big on the IPL for all saws using that style seal.
If you bought husky bearings they should be SKF and one should be open while the other only having the seal on the outside already installed. If you are getting bearings with 2 rubber seals they are likely not OEM. PTO side is proprietary so dealer only. I would not chance running a regular bearing with a standard rubber seal for the PTO. The seals are much different to the OEM one.
isnt the larger seal already installed in the bearing when you get it?Building a 346 and was wondering about the larger seal that come with the bearing kit. Pulled clutch off of my other 346 and all I see was the bearing but no seal . Any help appreciated.
isnt the larger seal already installed in the bearing when you get it?
is this the package you got from them,?
yes, but that bearing look to be the old one.Yes, in that pic he has a bearing with a seal already installed and another seal. Probably ordered bearings and seals not knowing the PTO bearing comes with the seal.
yes, he pulled them from IPl and ordered from huskyis this the package you got from them,?
then he did a mistake, you got seal 505416101 Instead of getting the bearing 525434201 who already have the seal installedyes, he pulled them from IPl and ordered from husky
Enter your email address to join: