After about 2 hours work today my 346xp died mid cut and will not restart.
I let it cool down and have so far checked the following
- there is fuel in the tank
- fuel was 40:1 fresh made today
- pulled the spark plug and there is a spark when pulling the cord
- when trying to start it fires during the pull then stops straight away
- pulled the muffler and it appears the piston is good
- i scooped the fuel filter from the bottom of the tank and could blow fuel out the bottom of the filter, there wasn't excess gunk
I do have a 2nd 346xp so that may help with parts to swap to help diagnose.
Any help would be appreciated, I have a lot of clearing to do next weekend.
I let it cool down and have so far checked the following
- there is fuel in the tank
- fuel was 40:1 fresh made today
- pulled the spark plug and there is a spark when pulling the cord
- when trying to start it fires during the pull then stops straight away
- pulled the muffler and it appears the piston is good
- i scooped the fuel filter from the bottom of the tank and could blow fuel out the bottom of the filter, there wasn't excess gunk
I do have a 2nd 346xp so that may help with parts to swap to help diagnose.
Any help would be appreciated, I have a lot of clearing to do next weekend.