TheAMMIXman
ArboristSite Operative
- Joined
- Jul 13, 2014
- Messages
- 210
- Reaction score
- 85
Anyone have issues here clone or OeM 460?
The oil pump appears to bolt up flat but not flush. There is a gap behind it all the way around, and the rubber tubing sealing the output doesn’t even touch.
I already recessed the seal they installed at whatever factory a little below the lip it sits in instead of the hair above they had it, I could see where the metal gear part from the pump was touching the metal part of the seal leaving marks from all the bolt on bolt off. Not sure what else I could try.
For over an hour I took the pump off, put it back on, with, and without the worm gear like 19 bagillion times(there is now wear marks under where the heads of the screws sit) and I just know it’s not right. It can’t be. It’ll piss oil every were like that and who knows what else would get tore up. I even tired some “high volume” Proline brand pump I had brand new in a bag, same thing. Exactly the same. I highly doubt it’s a miss machined case but it could be.
I must be missing something. Whose seen this?
Thanks in advance
Bruce
The oil pump appears to bolt up flat but not flush. There is a gap behind it all the way around, and the rubber tubing sealing the output doesn’t even touch.
I already recessed the seal they installed at whatever factory a little below the lip it sits in instead of the hair above they had it, I could see where the metal gear part from the pump was touching the metal part of the seal leaving marks from all the bolt on bolt off. Not sure what else I could try.
For over an hour I took the pump off, put it back on, with, and without the worm gear like 19 bagillion times(there is now wear marks under where the heads of the screws sit) and I just know it’s not right. It can’t be. It’ll piss oil every were like that and who knows what else would get tore up. I even tired some “high volume” Proline brand pump I had brand new in a bag, same thing. Exactly the same. I highly doubt it’s a miss machined case but it could be.
I must be missing something. Whose seen this?
Thanks in advance
Bruce