LipDawg
ArboristSite Operative
My new Husky 460 uses a 50:1 mix, while my 5 year old Husky 142 calls for 40:1. My weedwhacker, blower, etc also call for 40:1. My question is what is different about the 460 that it needs the different mix?
42.667:1, problem solved. Run good oil at whichever ratio floats your boat and run it in everything. That's what i do and i have never experienced a problem.
yes, a 50 year old or 5 year old chainsaw it all gets 40-1 mix here, makes no difference.
42.667:1, problem solved. Run good oil at whichever ratio floats your boat and run it in everything. That's what I do and I have never experienced a problem.
I use Pennzoil 30wt mixed with Ethyl @ 20:1 in all my saws.
Great stuff...
Gary
I use Pennzoil 30wt mixed with Ethyl @ 20:1 in all my saws.
Great stuff...
Gary
50:1 is fine, but 42.667, you gotta admit has something going for it.
Whatever floats your boat.
Hey Gary what do you think about using the multi viscosity oils, like 10w-40.LMAO
Hey that's what I use but I leave out this gas thing
7
Well I was using that ratio but was getting far too much smoke all over the place, I stunk of it till I changed to 49.230769 to 1.
That's a partner 100ml container filled up to the second from the top thread dropped in to five litres, make sure it all comes out though cos 49.230768 to 1 just isn't the same.
Enter your email address to join: