Erick
Addicted to ArboristSite
Seeee.... I told you!
Uh, lets see, the 5100 is the only saw that truly comes stock to the competition ....The 346 doesn't get ran with 3/8th .....The 346 conveniently forgets to be put on the scale. .....10" wood is all we test with.
Looks like lots of fun, good food & drinks and lots of laughs!
An objective shootout of off the shelf 50cc saws....Not hardly!
Seeee.... I told you!
I agree with Carl and Frank, what a CROCK!
The guy cutting with the 346 was cheating!!! LOL.
Everyone else was cutting the diamond (the long road) whereas he was pulling his chainsaw up right after the plunge and cut the square for an easier cut and a few 10ths I'm sure. If he would have cut the diamond too, no way would it have been as fast. Times are closer than they appear.
Muffler mods too....I guess it is true, they have to cheat to beat a 5100:jester:
ps, no one had a 8x8 canyon oak cant
Uh, lets see, the 5100 is the only saw that truly comes stock to the competition ....The 346 doesn't get ran with 3/8th .....The 346 conveniently forgets to be put on the scale. .....10" wood is all we test with.
Looks like lots of fun, good food & drinks and lots of laughs!
An objective shootout of off the shelf 50cc saws....Not hardly!
They just said it was stock and it likely would not have changed a thing with 3/8 because, as I have always said, Husky's kick. I know my 372 over the years has saved me 2000 hrs cutting <a href="http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=11" target="_blank"><img src="http://content.sweetim.com/sim/cpie/emoticons/00020403.gif" border="0" title="Click to get more." ></a>
If you don't like it, then plan your own damn shootout/GTG!
Just pointing out the obvious!
If you don't like it, then plan your own damn shootout/GTG!
Alright guys I gotta confess
I was cheating ....
We all know a stock MS260 can't hang with the big boys... we've all read it hear tooooo many times.
So here’s the truth...... I spit on my bar.
Yep I done it and I aint ashamed of it.... when you guys weren't looking I put a little spit on my bar for a little extra lube, I hate working with a dry bar, just to much friction.
So there ya have it... the secrets out.
Girls don't like it when guys spit.opcorn:
Alright guys I gotta confess
I was cheating ....
We all know a stock MS260 can't hang with the big boys... we've all read it hear tooooo many times.
So here’s the truth...... I spit on my bar.
Yep I done it and I aint ashamed of it.... when you guys weren't looking I put a little spit on my bar for a little extra lube, I hate working with a dry bar, just to much friction.
So there ya have it... the secrets out.
:laugh
For the cut times we used Ericks MS260. It's stock except for a mild muffler mod.
Alright guys I gotta confess
I was cheating ....
We all know a stock MS260 can't hang with the big boys... we've all read it hear tooooo many times.
So here’s the truth...... I spit on my bar.
Yep I done it and I aint ashamed of it.... when you guys weren't looking I put a little spit on my bar for a little extra lube, I hate working with a dry bar, just to much friction.
So there ya have it... the secrets out.
Girls don't like it when guys spit.opcorn:
I'm not fond of it the other way around either....
I'm not fond of it the other way around either....
Depends on what they are spitting on!
That's all I was doing they said it was stock prolly said the mm to make you boy's feel better<a href="http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=11" target="_blank"><img src="http://content.sweetim.com/sim/cpie/emoticons/000202BD.gif" border="0" title="Click to get more." ></a>Ps just gave ya a nova lol
Ya know what Fast, when we got done cutting for the day (I believe it was) Nik asked “so what was everybody’s favorite saw of the day to run”, anybody wanna guess what we all picked???:
I'll give ya a hint it was old slow and loud... vibrated like a SOB.
Enter your email address to join: